What did you do to/with your second gen today?

[codered]

**** everything! but seriously today was a pretty good day. my gas gauge shot back up to 3/4 of a tank and i peeled out in the ghetto and it went back down to 1/2 [emoji52]it hasn't stalled out since i unplugged that crank sensor but this weekend it's going in the shop. my boss lady is cousins with the owners daughter at the shop were i get my stuff done. not to mention i'm excited as hell because mr. T is doing my headlights. and my new pioneer HU should be here by 3/21.


sent from my brick using clay

 

[BBartow]

I'm just mad Walmart doesn't sell Purolators anymore. No more P1, then to make matters worse they were out of Mopars. Ended up with a Motorcraft, at least its still a Purolator

 

[txbass06]

Ordered my new y-pipe today. Hoping it'll be here by the end of the week so I can get it installed before work Friday night

Sent from my SAMSUNG-SM-G530A using Tapatalk

 

[codered]

I'm just mad Walmart doesn't sell Purolators anymore. No more P1, then to make matters worse they were out of Mopars. Ended up with a Motorcraft, at least its still a Purolator

at work i keep packing wix. i got the bug from william and the rotella. damnit!


sent from my brick using clay

 

[codered]

Ordered my new y-pipe today. Hoping it'll be here by the end of the week so I can get it installed before work Friday night

Sent from my SAMSUNG-SM-G530A using Tapatalk

idk if you know anything about the scavaging effect and the diff pipes, X,Y, and H. eventually i'd like to do a new exhaust setup.


sent from my brick using clay

 

[txbass06]

I do. I also know my truck will never see hp numbers where it would matter lol. If I was building a fast truck, extended cab and 4wd isn't where I'd start

Sent from my SAMSUNG-SM-G530A using Tapatalk

 

[BBartow]

at work i keep packing wix. i got the bug from william and the rotella. damnit!


sent from my brick using clay

Only place to get a Wix here is Oreillys for $6.49, which is the furthest from my house and oil is cheap at Walmart. I usually grab the same size big P1 for the same price at Walmart. If no P1, then a Mopar for $5.99. I got the big Motorcraft for $3.29, which is still a damn fine filter. Decided to keep using the T5 since its still the same price as PYB at $16.47.

 

[dodge dude94]

**** walmart

Seconded.

I'm just mad Walmart doesn't sell Purolators anymore. No more P1, then to make matters worse they were out of Mopars. Ended up with a Motorcraft, at least its still a Purolator

Yep, they clearanced them out a couple weeks ago.

 

[BBartow]

Seconded.


Yep, they clearanced them out a couple weeks ago.

I just looked online and they are selling classics for $1.50!

Little research shows they changed their lines. The new ones better be offered at Walmart.

 

[dodge dude94]

I just looked online and they are selling classics for $1.50!

Little research shows they changed their lines. The new ones better be offered at Walmart.

The stores wouldn't have clearanced the whole Purolator line carried at the store if they were going to carry the new one. They would have put the old filters in the "FLEX" aka clearance section and put the new Purolators on the regular section.

 

[BBartow]

The stores wouldn't have clearanced the whole Purolator line carried at the store if they were going to carry the new one. They would have put the old filters in the "FLEX" aka clearance section and put the new Purolators on the regular section.

 

[dodge dude94]

I worked at Walmart just long enough to figure all that out. haha

 

[ST-8]

A friend of mine from back in high school picked up a 94 1500 rclb 5.2 5-speed a few months back an has been fixing it up a Lil. I gave him my old aem knock of Cai after I got a bfi an he did a little hacking an modding an got it in, says the truck woken up a bit around 3k lol

 

[KyleW2]

Well the kid did another burnout today, it's on my snapchat for those of you that have me and if you don't my username is w_kyle2


Sent from my iPhone using Tapatalk

 

[jbmobbs]

Last time I checked this ain't safe lol


Sent from my SM-G900V using Tapatalk

 

[txbass06]

Well the kid did another burnout today, it's on my snapchat for those of you that have me and if you don't my username is w_kyle2


Sent from my iPhone using Tapatalk

I would've gotten expelled lol. Hell I had pretty much the same truck in highschool. '83 shortwide with a motor out of a buddy's bomber class dirt track car. Hit something on the way to school and broke a weld on one of the mufflers so I just pulled them off during shop. I got threatened by the vice principal. Told me that I'd get suspended if I made that much noise again

Sent from my SAMSUNG-SM-G530A using Tapatalk

 

[jbmobbs]

Just ordered drilled and slotted rotors with some ceramic pads. It came as a kit. I may buy some ebc pads

Sent from my SM-G900V using Tapatalk

 

[txbass06]

I ran ceramics on my '97. Almost no brake dust but they're harder on the rotors than a semi-metallic pad

Sent from my SAMSUNG-SM-G530A using Tapatalk

 

[KyleW2]

I would've gotten expelled lol. Hell I had pretty much the same truck in highschool. '83 shortwide with a motor out of a buddy's bomber class dirt track car. Hit something on the way to school and broke a weld on one of the mufflers so I just pulled them off during shop. I got threatened by the vice principal. Told me that I'd get suspended if I made that much noise again

Sent from my SAMSUNG-SM-G530A using Tapatalk

Everyone with older trucks will just sit there and make noise in the mornings so far the school doesn't care


Sent from my iPhone using Tapatalk

 

[rammanriley20]

My school is awful about cars. i make as much noise as possible and havent been threatened but any burnouts and theyre up your ass