What did you do to your Gen3 today?

[rocket]

failed an emissions.....seems the pcm needs time to adapt to a battery that has been disconnected......that's the excuse they gave me........I bought a vin # specific gas cap and filled up the tank.....bring it back on Tuesday.

 

[Redtruck-VA]

Actually, I'm not doing bags, I want a static 6/9ish drop that rides decently and will handle great. I have a plan and the right people to help me out.

The hard part is making more room in the front for the tire's upward movement. There's ways of doing it, but it's not easy and not cheap if you're not a good welder.

That's a tough nut.. good luck.

 

[HeavyD]

Finished the clear - so can install tomorrow.

they look better than the pics.

 

[Lil_Ram]

I got a set of used 285/70/17 duratrac today along with some 17 inch chrome clad too. Install went fine until I saw its rubbing on the uca. It's only rubbing a bit so I might just pass a grinder or take them off and order some 1/4 inch spacers

Sent from my SM-A500W using Tapatalk

I got a set of 1.5" spacers that need a home


Sent from my iPhone using Tapatalk

 

[MTLHEMI]

I got a set of 1.5" spacers that need a home


Sent from my iPhone using Tapatalk

Where are you located

Sent from my SM-A500W using Tapatalk

 

[Moose Knuckle]

Got a free touch screen. Kinda ****** and was a ***** and a half to install, but I got her in there.


Sent from my iPhone using Tapatalk

 

[Bullitt5339]

Trying to decide how to approach this front end rebuild......

I need to relocate the battery and get rid of the factory air box first. I have the battery relocation figured out and I'm going to order the parts today. Getting a short ram intake for the 3.7 is not a fun process, the only mass produced short ram is pretty cheap and goofy looking. I may have to make my own.

 

[Lil_Ram]

Where are you located

Sent from my SM-A500W using Tapatalk

Nashville, TN


Sent from my iPhone using Tapatalk

 

[rocket]

Trying to decide how to approach this front end rebuild......

I need to relocate the battery and get rid of the factory air box first. I have the battery relocation figured out and I'm going to order the parts today. Getting a short ram intake for the 3.7 is not a fun process, the only mass produced short ram is pretty cheap and goofy looking. I may have to make my own.

lot of good ******* pipe cai's on the forum.......plasti dip for the final touch.

 

[Bullitt5339]

lot of good ******* pipe cai's on the forum.......plasti dip for the final touch.

I have to keep everything away from the fenderwells completely. I'm probably just going to do a short piece of aluminum tubing powdercoated, drill a hole to mount the IAT sensor and put a nice cone filter on the end.

 

[rocket]

have too wash an wax her sometime this month.

 

[DietDodge]

Washed her all up and hopefully I'll have time to get some tint on those windows tomorrow. You can kinda see my dual exhaust in this picture too.

 

[Bullitt5339]

Just ordered my upper control arm relocation brackets from Michigan Metal Works.

 

[Redtruck-VA]

Just ordered my upper control arm relocation brackets from Michigan Metal Works.

When do you expect delivery?

 

[usaf2006]

How's Red? Haven't seen an update in a while.

 

[HeavyD]

Installed the center caps today - they are a little darker but look better than chrome.

 

[Bullitt5339]

When do you expect delivery?

No clue, probably 2 weeks or so. I don't imagine they take that long to make, since they're just flat plate cut out on a waterjet.

 

[Bullitt5339]

When they do get here, I have already contacted a local off-road shop to have my spindles reverse reamed for the tie rod flip. I was going to order the bit and do it myself, but they're only going to charge me an hour labor and already have the bit, so it works out to be the same price as me doing it myself.

 

[usaf2006]

It's nice when things work out easy and painless.

 

[Redtruck-VA]

How's Red? Haven't seen an update in a while.

It's been a while since I've last posted and don't remember what I had finished. The latest changes have been 05 pcm swap, relocating the gas tank, billet wheels and a larger radiator.