What do you still want to do to your 4th Gen?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Danny Roberts

Member
Joined
Mar 27, 2018
Posts
44
Reaction score
39
Location
Augusta Ga
Ram Year
2016
Engine
5.7
nice!!!! Where did you get the lower stripe?

DNS Wraps. He's out of Michigan but you can find him on FB and he sells them as a set. The red is color matched to the HEMI emblem and the text can say whatever you want. It's modeled after the Rebel Mopar Edition graphics.

I assume that you could adjust colors and finishes (the red is gloss and the black matte) as well but I don't want to speak incorrectly.

tail gate.jpg

other side.jpg
 
Last edited:

Ramm5.7

Senior Member
Supporting Member
Joined
Sep 23, 2017
Posts
5,321
Reaction score
7,351
Location
So Cal
Ram Year
2019 Ram 1500 Classic Bighorn
Engine
5.7 Hemi
I would Love to be able to do everything (almost) that i see of mods on this forum.........
Come on lottery...lol
 

R/T_Fire

Senior Member
Joined
Feb 3, 2015
Posts
3,432
Reaction score
1,205
Location
Pleasant Grove
Ram Year
2011
Engine
Hemi 5.7
More like what don't I want to do...

1. Manual trans swap
2. Complete suspension redesign using a Inez kit as a starting point to build a coil over system off of.
3. relocate fuel tank to rear.
4. relocate battery
5. establish 50/50 ish weight bias
6. interior roll cage while keeping interior clean and intact
7. Wheel tires
8. Brakes of some sort, still researching and developing how to get a early ford truck bear or wilwood kit to work on the ram with custom caliper brackets while retaining ABS operation (maybe)
9. Brake duct induction cooling system for front and rear
10. Roll pan - steel welded to body and body worked to match style lines of bed and rear
11. tonneau cover
12. Paint roof gloss black
13. Engine - still to be determined but 550-600hp to rear wheels is goal without super or turbo charger (depending on weight and weight bias)
14. functionalize sport hood scoops to operate as heat extractors (still figuring out the logistics of that
15. lighting upgrades, LED, painted lenses, HID (not 100% sure)
16. mesh grill inserts
17. upgraded radiator/ cooling system with electric fan set up (v6 or aftermarket)
18. upgraded cooling system, radiator
19. upgrade oil coolers

I think that tops off the fewwwwww things I'd like to do
 

moparpeetie

Senior Member
Joined
Sep 13, 2014
Posts
392
Reaction score
374
Location
south central PA
Ram Year
2012
Engine
Hemi 5.7
DNS Wraps. He's out of Michigan but you can find him on FB and he sells them as a set. The red is color matched to the HEMI emblem and the text can say whatever you want. It's modeled after the Rebel Mopar Edition graphics.

I assume that you could adjust colors and finishes (the red is gloss and the black matte) as well but I don't want to speak incorrectly.

View attachment 124047

View attachment 124048
Looks Awesome!!! Thanks for the info, in gonna checkem' out!!!!
 

Ravjay12

Senior Member
Joined
Jun 25, 2017
Posts
523
Reaction score
243
Ram Year
2012
Engine
Hemi 5.7
Going to do the Air Design body kit and possibly a new grill.

46CDD230-2CA9-4F2F-94FE-24984B370382.jpeg
 

Mints

Senior Member
Joined
Aug 11, 2015
Posts
168
Reaction score
97
Location
Arizona
Ram Year
2011
Engine
Issa Hemi
Just out of curiosity, why a procharger?

I would like to get a built motor in mine eventually. I'm starting to get dry lifter tick on startups every now and then.

Just to get some good ponies out of the truck. Of course supporting mods to go with that P/C. And they seems to be the only one that makes a vehicle specific kit which is always a pro.
Did you have something else in mind other than a procharger?
 

CLOUDL1GHT

Senior Member
Joined
Mar 17, 2014
Posts
851
Reaction score
557
Location
Lone Star State
Ram Year
2021
Engine
Cummins HO
Just to get some good ponies out of the truck. Of course supporting mods to go with that P/C. And they seems to be the only one that makes a vehicle specific kit which is always a pro.
Did you have something else in mind other than a procharger?

I love the pro chargers but I personally would opt for a magnuson or whipple supercharger.
The magnuson would work for our trucks with a vehicle specific kit but the whipple is only 2013+ ram trucks. That would be fun to figure out.
 

Mints

Senior Member
Joined
Aug 11, 2015
Posts
168
Reaction score
97
Location
Arizona
Ram Year
2011
Engine
Issa Hemi
I love the pro chargers but I personally would opt for a magnuson or whipple supercharger.
The magnuson would work for our trucks with a vehicle specific kit but the whipple is only 2013+ ram trucks. That would be fun to figure out.

Dont you love for the 13+ guys gets everything and were just forgotten about lol
 

Ajharris

Junior Member
Joined
Mar 28, 2018
Posts
6
Reaction score
6
Location
Maryland
Ram Year
2017
Engine
5.7
I wanna get some wheels. Maybe a set of 22" because i still want enough sidewall to be able to take a pothole or curb. I had 22's on my old expo with 305-45-22 tires and they were great. Biggest problem is gonna be choosing a style
 

iHemiMan

Senior Member
Joined
Apr 23, 2017
Posts
481
Reaction score
209
Location
Georgia
Ram Year
2016
Engine
HEMI 5.7L
A 3” PA Body Lift, Moe’s 5 inch stainless tips, some 20x10’s, and some 35” Toyo RT. Better get to saving!


2016 5.7L Ram 1500 QC
 

Aidan Crombie

Junior Member
Joined
Apr 2, 2018
Posts
16
Reaction score
2
Location
Georgia
Ram Year
2014
Engine
5.7 Hemi
The realistic, over the the next two year plan:

  • Tint match the front windows
  • Swap stock chrome quad headlights for blacked out ones
  • Swap out tail lights for nice LED ones
  • Fit LED’s in headlamps aswell as fogs
  • Install S&B CAI
  • Maybe a cheeky 24” Mufflex?
  • Dash cam (it’s my work truck)
  • Spray in bed liner (really need that one)
The “money is no object, sometime in the future” plan
  • Black OEM sport rims to replace stock aluminium rims (would be happy to trade?)
  • Tuner of some kind, everyone’s keen for the Diablo Sport I2
  • Maybe one day some long tube headers
  • 40” LED light bar for lower valance grill.
  • Back up camera
  • Magnaflow pipes if I can find one with the right sound, only wanting a slight increase in the grumbles.
  • Brake upgrade
  • Black sport Projectors
  • RA4 infotainment upgrade
  • Running boards

And that’s probably about it! :)

26D44715-77FD-4DAD-BDB5-7C474186CA65.jpeg

4C038C0E-22DF-416B-B3D0-8AFF4F7B0704.jpeg

E271EC7D-347E-4E1B-ADDE-0CAA7E5BE5DD.jpeg
 

shadowhawk

Senior Member
Joined
Oct 30, 2017
Posts
3,620
Reaction score
2,813
Location
Southeast WI
Ram Year
Black metallic 2016 Sport- born 05/2016
Engine
hemi 5.7 with I2 tune
really, the only thing left that I want badly is the 1.5" BL, or go real crazy and do a 4" BDS suspension lift AND the zone body lift. Then fit it with 35s.
 

Gordinho80

Senior Member
Joined
Jan 16, 2018
Posts
641
Reaction score
371
Location
Monroe, NJ
Ram Year
2012 1500 Big Horn
Engine
Hemi 5.7
Right now?

Pedal Commander
Trailer Brake Controller
20's
Maybe tint the front windows a bit.
 

shadowhawk

Senior Member
Joined
Oct 30, 2017
Posts
3,620
Reaction score
2,813
Location
Southeast WI
Ram Year
Black metallic 2016 Sport- born 05/2016
Engine
hemi 5.7 with I2 tune
that front window tint only cost me $90
 

tones2SS

Senior Member
Joined
Mar 1, 2014
Posts
10,393
Reaction score
2,691
Location
MA
Ram Year
2016
Engine
Hemi 5.7
I love the way my truck is now. I want to add the B.F. Goodrich KO2's when I need them. I would love to add the honeycomb grille in place of my chrome slat grille as well.
I WOULD ABSOLUTELY LOVE to add a full exhaust, meaning headers and exhaust all the way back, but living in looney liberal land, that isn't going to happen because of emissions here in MA. Would love to add the Kooks green headers and green cats. I would also consider American Racing as well.
 
Top