Lawsuit11
Senior Member
- Joined
- Sep 10, 2018
- Posts
- 817
- Reaction score
- 680
- Location
- Fort Worth, TX
- Ram Year
- 2018 1500
- Engine
- Hemi 5.7
Yes, if you have something in the pin 11 location it needs to be removed but just inserting a pin should slide in and click. To remove it again you would have to get a small tool in to remove again. If I'm not mistaken though, they have to be inserted the correct way but I believe it would still go in all the way but if not the correct way it wouldn't hold firm. And of course, you have to remove the outer casing by pressing in on the release tabs.
Yeah. I got everything down to a science but the only thing is the pin is to wide from the crimp and won’t fully go in the connector. I’ll have to do some crimping practice
2018 Black Pearl Ram 1500
LED Tail Lights, Black Quad Halogens with LED conversion, LED Black 3rd Break Light, Blacked Out Emblems, Rims & Grill, 8.4 UAQ conversion! MTC to ATC Mod almost