How's this for a wishlist!?!

[amenges]

What would you add?

 

[4x4Hemi]

The ability to view it on a phone! Haha damn iPhone!

 

[4x4Hemi]

viewed it on the computer now! looks impressive!

 

[KGBIGCOUNTRY]

Can someone copy and paste I can not get it to load the file.... if its impressive I wanna see toooooo

 

[4x4Hemi]

Performance
Item Cost
Flex-a-Lite E-Fan 183 $309 2
Spartan MAX Camshaft $450 5
Camshaft Pushrods $135 5
Camshaft Manley Valve Spring $225 5
Camshaft Spring Locater/Sealer $80 5
Big Valve Cylinder Head $2,050 5
85 mm Ported Throttle Body $299 6
Nitrous Stage 2 $1,100 6
EBC 3GD Black Rotors Front $268 1
EBC Greenstuff 7000 Pads Front $110 1
Gear Install Kit Front $210 4
Gear Install Kit Rear $96 4
Front Gears $195 4
Rear Gears $195 4
Auburn LSD $550 4
Pacesetter LT Headers Ceramic $429 2
NGK Iridium Spark Plugs +2 Colder $130 6
Taylor Thundervolt Spark Plug Wires $85 6
SharaDon Stage 3 Valve Body $400 3
Edge Racing 11" Torque Converter $475 3


probably doesntpaste well from excel haha but thats it

 

[KGBIGCOUNTRY]

Good list, how much of that are you going to do the install part? Also missing a DSP or Trinity from your list and the price of CMR tuning or Dyno tuning. Also need to add a Wideband kit into there to keep an eye on A/F. It is going to be cheaper to do the heads when you do the cam and have the heads come in built to your spec also.

 

[Catchin Zs]

Heckuva list there buddy, GL Lol

 

[Musclemckeester]

Get after it lol

Good list there, I agree need a Trinity though.

 

[KGBIGCOUNTRY]

The OP may have a tuner already IDK seeing as there is no mods in his sig. He will need a tuner though to support the cam alone not counting the heads and then the spray. In the parts alone listed is $7,791 not including the tuner and the custom files for it. Install on the motor stuff is not bad and can be done by him, the gears would be better for a shop to tackle around 1K for a 4x4. Fluids for the motor work and trans work figure in another $200 give or take depending on what fluid is used. Only other parts I see missing is a 180-170* t-stat for $20, Mopar head gaskets, new crank bolt, new cam bolt, new head bolts, Mopar exhaust gaskets, header bolts, assembly lube for the motor. The gears will need their fluids also which im guessing the shop will supply in the cost of the install.

 

[amenges]

Blah. I dno what happened to my signature. Used to be there. Right now just running CAI, 180T-stat, Superchips 3950 and 545RFE booster cable. There's another part to the Excel document if you click on sheet 2 toward the bottom of the page. all my exterior mod wishlists.

Finish Debadge $0
Dent Removal/Paint $300
Stubby Antenna $25
Line-X Bumpers $650
Westin Bull Bar 32-1955 $255
Recon Illuminated Door Sills $215
RBP Fuel Door Cover $65
EGR Bolt On Fender Flares $374
Cervini SRT-10 Hood $725
Lite Glow Train Horn System $290
Turn Signal Side Mirrors $300
194 License Place LED $40
912 Reverse Lights (High) $40
912 Brake Light (High) $40
3157 Rear Tail Lights $80
3157 Rear Reverse Lights $80
BDS 6" Lift $3,500
Rims (Approx) $1,100
Nitto Trail Grapper 37x12.50R20 $1,915

Hoping I can install most of it myself. I work at the fire dept and private ambulance, both of which have pretty experienced mechanics with all the tools, lifts etc you can imagine.

 

[Musclemckeester]

You can get you an RCX 6" lift for 1/3 the cost of a BDS lift and both carry a lifetime warranty.

 

[Catchin Zs]

Blah. I dno what happened to my signature. Used to be there. Right now just running CAI, 180T-stat, Superchips 3950 and 545RFE booster cable. There's another part to the Excel document if you click on sheet 2 toward the bottom of the page. all my exterior mod wishlists.

BDS 6" Lift $3,500
Rims (Approx) $1,100
Nitto Trail Grapper 37x12.50R20 $1,915

Hoping I can install most of it myself. I work at the fire dept and private ambulance, both of which have pretty experienced mechanics with all the tools, lifts etc you can imagine.

Ummmm 3,500 for a BDS lift? Even including labor, that's a huge price. Unless you're going with leafs and track bards

 

[amenges]

Yea that included leafs, track bars and Fox 2.0 shocks. I'm sure I'll look around before I purchase a lift. I just quoted one of the more expensive ones so when I find a cheaper one I can say "Woo Hoo!"

Oh and after all that performance... Super or Turbo. haha

 

[bluethunder08]

The only thing I see is with the cam and heads I would go ahead with the 87mm throttle body. Also, yours is a 2008 so no need for the plug wires. It's coil on plug. Great list.

 

[KGBIGCOUNTRY]

You can go to User CP and put a sig back in. Far as your current mods the SC will not support those mods so its back to getting a DSP or Trinity to get the truck running.

 

[amenges]

Yeah after i start doing the heavier non bolt on mods i was to get a custom tune. I just dont know where in northeast ohio to go. Havent really researched it that much

Sent from my DROID RAZR using Tapatalk 2

 

[KGBIGCOUNTRY]

PWR, Inertia, Sharadon, Arrington does not show any auth installers near you. If your gonna be Dyno tuned find a shop that has done these trucks or modern Hemi's if not your gonna be looking at doing email tunes with a tuner.