What did you do with your 4th Gen this week?

[8732cuts]

Monday installed a Spohn adjustable panhard bar, installed 1" spacers and cleaned the rearend up.

View attachment 179019

View attachment 179020

How much better is the drive? What height lift do you have? Tightened up that rear?

Sent from my SM-N960U using Tapatalk

 

[69GWC]

How much better is the drive? What height lift do you have?

Sent from my SM-N960U using Tapatalk

I have not drove it yet but will be this weekend, 2 1/2 hrs down and then back with my new camper so will see then how it feels.

I have Bilstiens on the front at 2.8 and now have 1" spacers in the rear along with the 20 psi I run in my Timbergrove air bags that give about another 1" or so.

Pictures do not have the 1" spacers installed.

 

[8732cuts]

Keep me posted please

Sent from my SM-N960U using Tapatalk

 

[JoshR104]

Picked up a new toy... Carbon/Kevlar Bell Canoe works 16 footer. Wish I had gotten the roof racks installed was a 2 1/2 hour drive like that surprised no state troopers pulled me over lol.

 

[O.R.T.]

That’s one part I can’t decide on. Make drawers that pull out or raise the entire platform and have a couple access doors/lift panels to get in to those areas. And yes cardboard templates are key

Let's see if this helps you visualize what I'm imagining. The drawer has to slide out x-amount so it lines up the stealth door in the drawer base with the chance to open it up at just the right spot to get access to the pocket. There's nothing saying you need a bottom below the drawers. You can do two long drawers, same length each, a longer than the other drawer, yes, in this case having drawer access from either side, or just one long drawer. Me, I'd go 60-40 or 70-30 with the bigger number favored to the passenger side with the shorter drawer for the driver side for quick emergency access stuff. You only need something a little bit taller than what you had there and you can retain the headroom for the dog.

Don't make me drive down there when we're done @ Disneyland in November. Heeheehee

 

[revitupmoto33]

Let's see if this helps you visualize what I'm imagining. The drawer has to slide out x-amount so it lines up the stealth door in the drawer base with the chance to open it up at just the right spot to get access to the pocket. There's nothing saying you need a bottom below the drawers. You can do two long drawers, same length each, a longer than the other drwaer, yes, in this case having drawer access from either side, or just one long drawer. Me, I'd go 60-40 or 70-30 with the bigger number favored to the passenger side with the shorter drawer for the driver side for quick emergency access stuff. You only need something a little bit taller than what you had there and you can retain the headroom for the dog.

Don't make me drive down there when we're done @ Disneyland in November. Heeheehee

I'm starting to see it.. But by all means feel free to come down and show me how its done lol

 

[WY-Dave]

After the maiden voyage of the camper yesterday,


took her out to the bro-in-law's hunting camp.

 

[Punishher7]

Picked up a new toy... Carbon/Kevlar Bell Canoe works 16 footer. Wish I had gotten the roof racks installed was a 2 1/2 hour drive like that surprised no state troopers pulled me over lol.

View attachment 179050

Beautiful truck!


Sent from my iPhone using Tapatalk

 

[bellaireroad]

Let’s see in the past 2 weeks:
Electric slider rear window
Dynamat on the rear cabin and B columns
Cargo cam
2018 radio with Nav
Automatic temp control

Next on the list is a rambox bed swap....got it sitting in my drive....., got a new chassis wiring harness to figure out first


Sent from my iPad using Tapatalk Pro

 

[Addicted2fishing]

Changed engine air filter, changed cabin filter, drove to farm for some goose hunting [emoji41]. Took a selfie with one! Ok, it’s a decoy but still funny lol


Tiped on ifone using Tapatalk and auto correct. Can’t you tell?

 

[4eyedconekiller]

Loaded her up with .5yd of pea gravel to finish the backyard off...

 

[JimsRamTruck2012]

It's 4:30 p.m. where I'm at. Have you driven your Ram today?

 

[ram1500rsm]

Most involved mod to date... hahaha not counting the 30 sec it took me to drill one hole and screw the little bolt in to hang this monster in there It was a present from my 13 year old daughter as i'm always ******** about not having light in the truck bed at night, so i had to honor the gift.
2019-09-05_01-00-07 by RAM RSM, on Flickr

 

[tones2SS]

It's 4:30 p.m. where I'm at. Have you driven your Ram today?

LOL
Yes, yes I have!

 

[JoshR104]

Beautiful truck!


Sent from my iPhone using Tapatalk

Thanks its a work in progress just dont tell my wife how much its cost.

 

[6.7CumminsDrvr]

Having wheel’n withdrawals so I couldn’t resist while doing a little work around the house......sad, I know!

 

[22hemi13]

Got the wife’s rams tires rebalanced, alignment, 1/4” spacer and picked up oem side steps for 100. I’d wash it but it’s gonna rain all next week......in Arizona lol. Helgas wheels should be in today so those should be on too phew

 

[ram1500rsm]

Out for some fresh air
Untitled by RAM RSM, on Flickr

Untitled by RAM RSM, on Flickr

 

[Rugged]

Did a little camping in the mountains. Got to put it in 4 wheel drive. Always makes me happy.

Sent from my iPhone using Tapatalk

 

[Statcher1]

Had mine hauled to another dealer today. After it’s sat at Tim Short of Middlesboro, Ky for almost a month. With them doing absolutely no work on it at all. Until this week when they decided they couldn’t do anything to it without ordering all new replacements parts.


Sent from my iPhone using Tapatalk