620mac
Senior Member
Ok, so I started this project kinda wanting to create a new idea. Instead of going out the bottom of the air box with a 3" pvc or flex hose, I have all the piping and hardware to go out the front of the box, angled down, then angled again directly either behind the bumper to just get cold air, or I can angle again slightly, and run it to a 4" collector, which will have it's own hole in the plastic underneath the front bumper, below the fog lights, which would create ram air. I know 2" piping isn't the biggest, but it's what fits out the front of the box with no issues. I also figured if I ran it to the curved black plastic under the bumper with the 4" collector, that should cram a lot of air, and since it wouldn't be facing straight forward, I shouldn't have to worry about too much water getting in it. So here's my questions:
What do you think of the idea?
If I do the ram air, should I take off the snorkel and close that old opening, so it's not losing pressure from the ram air tube?
Open to any suggestions.
What do you think of the idea?
If I do the ram air, should I take off the snorkel and close that old opening, so it's not losing pressure from the ram air tube?
Open to any suggestions.