What did you do with your 4th Gen this week?

[circuitguy]

Had this hard water spot remover for glass from Chemical Guys for a few months but never got around to using it. My Ram parks outside often and gets hit by the neighbors sprinklers when the wind kicks up in the early mornings. Tried it out today and this stuff works! Takes a but of rubbing with a damp cloth but all the hard water stains are now gone. Took 10min per mirror and 20min per side glass. You all have to try this stuff out!

 

[O.R.T.]

^^I think respect for other people's property is a thing of the past!
Jay

Maybe but Karma is still a thing by one means or another.

Things will catch up to the other vehicle owner.

 

[Kid's HEMI! !!]

LEDs went out on tails today . Never ends. Anyone know where to get aftermarket tails that work with factory leds most don’t

 

[JimsRamTruck2012]

Good Afternoon Everybody! Just been driving it.

Oh and Kid's HEMI! !! - See if Depo has the tail lights you are looking for.

 

[Pull Ya]

Update on the firewood pictures.

I made the rack out of some scrap 2x2 square tubing it holds a full tic of wood. I’ll have to fill it up 2 or 3X this winter.



Noon
Headed back to Paris for another load of wood.

The Blue Mule

Paris is a long way for you to be going--hope you got a fording kit on that truck and some arm floats on-----LOL

 

[ram1500rsm]

She cleans out pretty good.

Coat of Socal desert Wax
Untitled by RAM RSM, on Flickr

Then after today shower
Untitled by RAM RSM, on Flickr

 

[electricyeti]

Had this hard water spot remover for glass from Chemical Guys for a few months but never got around to using it. My Ram parks outside often and gets hit by the neighbors sprinklers when the wind kicks up in the early mornings. Tried it out today and this stuff works! Takes a but of rubbing with a damp cloth but all the hard water stains are now gone. Took 10min per mirror and 20min per side glass. You all have to try this stuff out!

View attachment 183385

View attachment 183386

View attachment 183387

Looks good. I clay bar mine and my headlights. Then Sprayway

Sent from my Pixel 2 XL using Tapatalk

 

[circuitguy]

Looks good. I clay bar mine and my headlights. Then Sprayway

Sent from my Pixel 2 XL using Tapatalk

Oh ya! I clay bar the complete truck paint including the headlights, fog lights, taillights and the third brake light. I make sure every inch of that truck feels like glass!

 

[werdna1977]

LEDs went out on tails today . Never ends. Anyone know where to get aftermarket tails that work with factory leds most don’t

Spyder has some that i have used for over a year now without issues

http://www.spyderauto.com/product.php?id=ALT-YD-DRAM13V2-LED-BK

 

[RAM DRVR]

hit 60,000 miles Yesterday…………….

 

[waynestractor]

Installed my rear 1.5" spacers to correct the front high attiude after doing the Bilsteins at 2.1"...

 

[fire101fighter]

Installed my rear 1.5" spacers to correct the front high attiude after doing the Bilsteins at 2.1"...View attachment 183453

I think I want to go 1.5” in the rear. I have the 3/4” now and it sits perfectly level. Maybe bump it to the 1.5” to offset for any load. Or get airbags


Sent from my iPhone using Tapatalk

 

[waynestractor]

I think I want to go 1.5” in the rear. I have the 3/4” now and it sits perfectly level. Maybe bump it to the 1.5” to offset for any load. Or get airbags


Sent from my iPhone using Tapatalk

I also have airbags to help out with heavy loads.

 

[Pull Ya]

The airbags make a difference. Load the bed up and shoot a little air in them and your level again. No more headlights in the tree tops or dragging the rear bumper on the ground.
Jay

 

[ScLeCo]

PPE Transmission pan is in! (not my pic but this is what it looks like, I don't feel like crawling under there just to take a pic)
Anyway CHECK your transmission fluid levels guys. I only have 30k miles but for some reason I was about a quart low.

 

[michael harpe]

I got half my wheels and tires.. [emoji2357][emoji1860] the other 2 will be here tomorrow.

Sent from my SM-G960U1 using Tapatalk

 

[waynestractor]

The airbags make a difference. Load the bed up and shoot a little air in them and your level again. No more headlights in the tree tops or dragging the rear bumper on the ground.
Jay

It's one of the first mods I do to any new truck I get, air bags and an Airlift Wireless One Controller. If you do airbags, do yourself a favour and put a compressor/controller in so adjustments are done at the push of a button!

 

[McBroom]

Hauled another load of wood yesterday. Just about enough for this winter.


The Blue Mule

 

[Midnight Storm]

I got half my wheels and tires.. [emoji2357][emoji1860] the other 2 will be here tomorrow.

Sent from my SM-G960U1 using Tapatalk

White 7 spokes on beige barrels. Interesting wheels dude.

 

[michael harpe]

White 7 spokes on beige barrels. Interesting wheels dude.

What can I say, I like that wagon train Oregon trail look. Now who to decide gets malaria?

Sent from my SM-G960U1 using Tapatalk