Boom installed!! I just ran across a couple issues listed below.
View attachment 202650
My first issue was the ATS sensor. I could not for the life of me get it to seat all the way without pushing the entire rubber seal through the hole into the tube.... I even dabbed a tiny bit of silicone grease on there with no luck did the same thing over and over. I left it where its at I got no lights and its pretty stable where its at. Imma try it again soon to see if I can get it since I was also hindered on time to get this on.
@Hemi395 Did you have the issue with the ATS that I had? If not did yours just slide right in? Did you have to use something?
My second issue was the elbow going into the wheel well was definitely hitting and scraping against a AC line connection. This seems to be different per truck though. Its not pushing hard against the connector once it gets set in there. Mine was just a bit of work to get it in.
Other than those issues all in all I like it alot! 100% definite improvement in throttle response! And the truck does make a little bit of a louder tone around 3k rpm but nothing bad at all (Wife didn't even notice FYI) and I would say its 98% just as loud as stock.
View attachment 202651
View attachment 202654