FTWLaw
Junior Member
- Joined
- Jul 7, 2020
- Posts
- 10
- Reaction score
- 1
- Location
- Fort Worth, Texas
- Ram Year
- 2013
- Engine
- 6.7 Cummins
Hello all. I got a new to me 2013 Ram 3500 last week. discovered that the driver's lock button was INOP. After reading about the option to add power folding mirrors, I decided to replace the current control switch (68110866AA). Since I plan to eventually add the power mirrors, I went ahead and ordered a 68110867AB. After replacing, the lock button worked! Then I discovered, both mirrors functioned, both back windows worked, but I can not control the driver's or passenger's window. No up, no down, nothing. I can control the passenger's window fro the passenger's side.
I replaced the old controller and functionality is back. I though it may be the need to program the auto up/down function and held the switch up 5 secs, then down 5, power cycled truck and nothing. Also rolled the windows down with old control, replaced with new control and tried the programming function again but no go.
the old switch is now back in place without lock control. :-(
Any advice?
I replaced the old controller and functionality is back. I though it may be the need to program the auto up/down function and held the switch up 5 secs, then down 5, power cycled truck and nothing. Also rolled the windows down with old control, replaced with new control and tried the programming function again but no go.
the old switch is now back in place without lock control. :-(
Any advice?