I reached put to the guy but haven't heard back.
He put alot of work into it but the mounting was crap.
Here's his post
What do you guys think of my most recent build for my shop truck?
AlphaRex 09-18 Ram “2019 Style” Headlights
Morimoto D2S 4.0’s
Profile D2S Projectors
Custom Fabricated Mounts for all 4 Projectors
x4 Morimoto Xb35 Ballasts
x4 Morimoto D2S Ignitors
x4 Morimoto 5800k D2S Bulbs
Profile Prism 18” RGB Strips for Lower DRL
Profile Prism 12” Strips for supper DRL
Profile Prism RGB Demon Eyes x4
Morimoto XBT Bluetooth Controller
Custom Paint (by me)
Custom tinted U+L DRL Lenses with ViVViD Hex+ Headlight Tint
Tinted Corner Markers
Tons and tons of custom wiring.
All 4 D2S projectors are on for low beam, shield drops on all 4 for high beams. Mounting the projectors into the AlphaRex internals was no easy task. Took a couple weeks and 4-5 different methods until I finally custom fabricated brackets, now they are mounted perfectly.
All wiring is plugged, not a single crimp or hardwire. Everything is plug-n-play with either 9006 plugs or 2/3/4 pin JST plugs. Tons of custom wiring was needed for this build.
As far as I know, this is the only AlphaRex RGB Ram build, that also has BOTH projectors upgraded.
I know for a fact that I’m forgetting something....
What are your thoughts? I am actually debating if I should reopen them and throw in some switchback DRL strips up top and bottom as my main running/turns as these RGB strips just are not bright enough for DRL/Turns. I’d still keep them too for show. — feeling relieved.