clint_99
Junior Member
- Joined
- Oct 16, 2018
- Posts
- 11
- Reaction score
- 0
- Location
- Killeen, Texas
- Ram Year
- 2011
- Engine
- 6.7L Cummins
So after power washing underneath my truck, I noticed that the water must've disconnected a butt splice for my driver-side fog light. So the first thing I did was change the bulbs to LEDs. I didn't notice that the butt splice come un-done until after I changed the bulbs. So after I changed the bulbs. The driver had very little power and the passenger side had normal power. After a couple of hours of having the new bulbs in, the passenger side started not to work. So I ordered a new wiring harness for the driver side so I don't have to deal with a butt splice. I also checked the headlight switched inside the cabin and everything seems normal. I can press the fog light button on the switch and the dash indicator comes on but the fog lights don't. I also replaced the 20 amp yellow fuse. I can't seem to find what/where the relay is. Maybe the relay went bad? Do you think they would've turned off in the software, meaning should I get the OBDLink MX+ to activate the lights?