wayned87
Member
- Joined
- Feb 11, 2014
- Posts
- 63
- Reaction score
- 31
- Location
- Clinton, UT
- Ram Year
- 2015 Ram 2500
- Engine
- 6.7 Cummins
So, reading this, it sounds like you can convert a single zone to a dual zone? I read the above
1 - Swap SZ harness for DZ harness
2 - Swap SZ door for DZ door
2 b - you can replace all the doors with the kit
3 - Add a 5th door actuator to the D Z harness
4 - Reassemble
Am I understanding this correctly? If I don't have to use the hvac box I bought used, and can re-use mine, and just take parts off the DZ box, add the blend doors, and harness, 'd prefer that.
I see the poster above converted to a laramie harness as well, as I had Mike add the DZ to my 8.4, I'll have the needed harness too...
It seems this may be a different way to do this add-on?
Yes this is similar to what I did.
I bought the following:
Full blend door kit, (could have just bought the 1 blend door for DZ).
Used DZ harness.
Used actuators.
Then programmed!
The HVAC box literally just comes apart with clips and a few screws.