Surprise surprise. Christmas came early. These things are beastly. For future reference I turned them 1.5 turns to lift the truck higher. It is 7 threads showing above the ring.
Edit: have to take it all back apart. I drove it to settle the suspension and I’m at 39.5” driver and 40” passenger. 41.5” rear. So I need to turn the driver up 5-6 turns and the passenger up 3-4 to bring it around 40.5-41”
Edit2: turned it up 6 on driver and 4 on passenger and new measurements are 40.5” to ground. Was hoping for a bit taller but I may try to find a way to lower the rear a bit since the fox shocks are a pinch short anyways. Anyone know the spring rate and lift height for icons or any other springs? Trying to keep a tad higher load over stock since I do use the truck.
@ram1500rsm any ideas? What height are the 5th gen ORP springs? Or I can always cut 1/2 a coil off of these springs.
Edit3: this is bugging me to much so I’ll be adjusting the front Monday. Up 3 turns on both sides.