Recent content by PdPuNOme

  1. PdPuNOme

    Ride height with AlfaOBD (air suspension)

    Roman217 I myself am in the middle of acquiring all the components to add the air ride too! Tired of aftermarket bags setup just want factory. This will be an easy project for me and plan to mod in a heater and dryer to avoid the common cold weather issues, but any pointers you may have please...
  2. PdPuNOme

    dash buttons for lift and lower

    any luck? Thinking about to doing the same moding in to control aftermarket compressor and bags...
  3. PdPuNOme

    4th Gen Black Interior Trim Pieces

    I can confirm that these are indeed the proper ones, purchased new and installed. Crew Cab 5RM911X7AC 5RM901X7AC
  4. PdPuNOme

    Laramie Interior Handles

    You do need to ensure the limited you are pulling from is from the same year as there are alot of variations to just the limited one alone throughout the 4th gen years which will cause incompatibilities which could be overcome with figuring out the pinout differences. I know from real world...
  5. PdPuNOme

    Additional UAQ/UAS Update Files 28.3/30.24/34.2

    Finally worked using 39.5 and the 21.9 map file, restored navigation maps. Now will do again tomorrow to go back upto 39.6 but this time will include the 21.9 map files. I have seen on jgc forums a 22.5 and other higher updates for maps wonder if ram will get any?
  6. PdPuNOme

    Additional UAQ/UAS Update Files 28.3/30.24/34.2

    Same, I'm going to keep trying and report back
  7. PdPuNOme

    UAQ /UAS , Better yet, Uconnect in general with USB C ports :)

    Checked under the 18 and still do not see the Radio & Connectivity: Number of USB Audio Sources Present 4 USB Port
  8. PdPuNOme

    UAQ /UAS , Better yet, Uconnect in general with USB C ports :)

    Thanks I'll look at 18's. I have the ecuconfig it was just the other one you stated changing to 4 ports.
  9. PdPuNOme

    Additional UAQ/UAS Update Files 28.3/30.24/34.2

    Finally figured out how to unzip the 21.9 file, have to use 7zip and open the archive to then unzip it, anyway now trying to reload the maps but cannot get the radio to react. Anyone else find a way to reload the map files after losing them during an upgrade? I am at the 39.6 version currently...
  10. PdPuNOme

    UAQ /UAS , Better yet, Uconnect in general with USB C ports :)

    For the radio & connectivity which body control network are you using? I am not finding that whether in 15 or 13-17. Are you using 18+?
  11. PdPuNOme

    4th Gen Black Interior Trim Pieces

    CONFIRMED: Leather Wrapped A pillars in Black are 7KF751X9AA 6NF761X9AD DO NOT FIT 4th gen as shown in pics previously. These black leather wrapped a pillars are off the 19-22 5th gen HD 2500/3500 which is a cross between 4th gen and 5th gen. B Pillars do fit and are a match along with c...
  12. PdPuNOme

    4th Gen Black Interior Trim Pieces

    I have these and unless I am going crazy they do not fit, as in at the dash. There is a gap due to how the curve is greater on the 4th gen than the 5th gen HD trucks. Otherwise everything else lines up. The B pillars are fine, so just the A pillars in question.
  13. PdPuNOme

    2022 Ram 2500 Laramie door handles

    Locks and unlocks the doors, passive entry is the term. You can turn on and off the feature via the radio. Its a nice convenient feature so you do not need to use the fob just the same as push to start. As long as the fob is within close proximity of the truck it will lock unlock. Unlock does...
  14. PdPuNOme

    Laramie Interior Handles

    If interested I have wire harnesses and kits made up for those that want to install either the full panel swaps or just the door handle light swaps. 4 door kits includes front door harnesses and rear door harnesses. PM me, can ship anywhere.
Top