dually longer wheel studs

tacomak22 · Sep 13, 2025

has anyone come up with a longer wheel stud that matches the 4th gen duallys studs? iv heard of a cross part with a mustang but couldnt seem to find the correct part # ...

im looking for something that might be 3/8" longer so i can install a set of 1/4" wheel spacers up front to push the alcoas out just a tad. currently with the alcoas i have good thread engagement but its prolly just at 2 threads exposed now.

also.... im looking for the front... dorman shows 2 studs diff studs... are the rears longer than the fronts? or swappable?

Bigskyroadglide · Sep 13, 2025

This is what I used when I put 10mm spacers on my wheels. They are approximately 15 mm longer than stock studs. I used these in the front and the rear.

Dorman 610-530 Rear M14-1.50 Serrated Wheel Stud - 15.90mm Knurl, 78mm Length Compatible with Select Ford Models, 10 Pack (Made in USA)

tacomak22 · Sep 14, 2025

thank you ill take a look at these

Bigskyroadglide · Sep 14, 2025

Make certain you understand how many turns you have on your lug nuts pre and post installation. With most manufacturers lug nuts they are looking for a specific number of turns based on the design of the lug nut.

DA67Goatman · Sep 15, 2025

I used Dorman as well, but different part numbers.

BlownGP · Jun 10, 2026

Bigskyroadglide said:
This is what I used when I put 10mm spacers on my wheels. They are approximately 15 mm longer than stock studs. I used these in the front and the rear.

Dorman 610-530 Rear M14-1.50 Serrated Wheel Stud - 15.90mm Knurl, 78mm Length Compatible with Select Ford Models, 10 Pack (Made in USA)

These will fit a 18 1500?

I can't seem to find any ARP ones.
Thanks

dually longer wheel studs

tacomak22

Junior Member

Bigskyroadglide

Moderator

tacomak22

Junior Member

Bigskyroadglide

Moderator

DA67Goatman

Senior Member

BlownGP

Senior Member

Similar threads

Latest posts

Staff online

Members online

Forum statistics