LemmysDad
Chairman of the bored.
- Joined
- Sep 13, 2018
- Posts
- 225
- Reaction score
- 242
- Location
- Stirling Ontario
- Ram Year
- 2022 RAM Rebel
- Engine
- Hemi 5.7
Need a little help. While rotating my tires I messed up the threads on one wheel stud on each of the front sides of my 22 Rebel. It occurred when replacing the locking lugs. I think they weren’t seated properly in the socket. And maybe I was in a bit of rush, maybe lol. Anyway they stripped the threads from the end of the studs.
So, question, do I need to remove the hub to replace the studs or is there a “sweet spot” to remove and subsequently replace the studs? The lug nuts will thread on, but my tendencies towards being OCD won’t allow them to stay that way.
And before anyone says crawl under and have a look….its winter here and sloppy and crappy as all get out so I’d like to get the info beforehand if I can. Thanks.
So, question, do I need to remove the hub to replace the studs or is there a “sweet spot” to remove and subsequently replace the studs? The lug nuts will thread on, but my tendencies towards being OCD won’t allow them to stay that way.
And before anyone says crawl under and have a look….its winter here and sloppy and crappy as all get out so I’d like to get the info beforehand if I can. Thanks.