Search results
-
2012 Ram 1500 Outdoorsman on 40's, Under 32k Miles (Salt Lake City)
Looking to sell my truck to move up to a new Cummins. Will give a special deal to any RamForum member. Check the link below for pictures/details/etc.. 2012 Ram 1500 Outdoorsman on 40" Tires + Much More! -
Brake Line Extensions
Where can I get some brake line extensions for my 2012? I've been having a tough time figuring it out from searching online..I don't want to hear that you or I don't need them, your opinion will be ignored. My brake lines are currently my limiting factor in the rear, not sure about the front... -
Need Help Finding Large Drop Hitch
So, with the future plans for my truck, my 6" drop hitch isn't going to cut it any more.. Here's what I'm looking for: 12" or larger drop For a 2" receiver Pintle plate or ball mount (prefer adjustable) MUST BE RATED FOR AT LEAST 10k Please help me find something! So far all I've found is a...- rwalk
- Thread
- Replies: 8
- Forum: Towing & Hauling
-
Max Rear Spacer Size?
When I add my 3" BL, I'm looking to add a rear spacer as well to give me some small rake since I hate squatting when I tow or haul anything. Can I run a 2.5" spacer without having to add anything else like longer sway bar links, a larger track bar drop bracket, longer shocks, etc? -
2500 Rear Coils in a 1500?
In the next few months I plan to go bigger with my truck, and in the rear I had originally wanted to just add a coil spacer. After thinking it over I was toying with the idea of adding rear lift coils for a 2500 (out of an 8+" kit if they make one yet?). My reasoning for this is that it should... -
4th Gen Passenger Side Tow Mirror
So basically I got a set of tow mirrors for Christmas from 1A Auto and the passenger side arrived with one of the lenses broken. They took care of it and sent me a new one, so I have the damaged one available. I haven't tested it out but all the functions of the mirror should be fine, it just... -
Front End Upgrades?
Does anybody know of some good front end upgrades I can make to help my 2012 1/2 ton IFS cope with large tires? I'm guessing the best places to start are ball joints, CV's, and axle shafts; however I'm having a tough time finding anything for my axle. -
Tow mirror question
I got a set of tow mirrors for Christmas from 1A Auto and I was wondering if I also need to get the support brackets for them, I don't think they come with the mirrors, so how important are they and where can I get them? Sent from my iPhone using Tapatalk -
Front Diff 4x4 Actuator
Well, I finally got a front diff assembly from a 2011 for my 4.56 swap, but it did not come with the actuator, does anyone know if the 2012 one that is on my truck now can be swapped onto the 2011 with no issues?- rwalk
- Thread
- Replies: 1
- Forum: Engine & Performance
-
Bully Dog GT for Hemi+ Tuner For Sale
Because I decided to try out the superchips tuner, I now have my bully dog for sale. The tuner is unlocked and ready to do in your truck. Looking to get $275 including shipping OBO. Comes with all cables, manuals, paperwork, the original box, and suction cup mount -
How to properly uninstall Bully Dog tuner
Well, in preparation for my new super chips tuner, I want to make sure I know how to uninstall my Bully Dog correctly so it can be installed on another truck. What steps do I need to take?- rwalk
- Thread
- Replies: 0
- Forum: Engine & Performance
-
Need Lots of Help Picking Out New Head Unit
Since I bought my truck I have learned so much about suspension, exhaust, lights, etc. , but audio is still completely new to me. So, let me start out by saying I am looking to spend $300 or less including all harnesses and a new dash bezel if necessary. I have the stock uConnect 130 HU...- rwalk
- Thread
- Replies: 16
- Forum: Audio & Electronics
-
How to adjust headlights?
For some reason one of my headlights is pointed up and the other is pointed down (or one is correct and the other isn't) and I'd like to fix it so I don't continue to blind people with the one pointed upwards. Not too sure how to go about doing it though, so any help is appreciated. -
Interior Lights Won't Shut Off
My friend has an '01 and the other day when he shut his door he noticed the lights never shut off, we tried the dial for the lights and they don't do anything, the lights now just stay on perminatley.. For now we just pulled the fuse but that also shuts off his radio and dash lights, has anyone...- rwalk
- Thread
- Replies: 1
- Forum: Audio & Electronics
-
How to take rear RAM head off?
I know that it is secured in there, but how do you pop the tabs out to remove it? I don't want to try anything and accidentally snap a tab -
Truck won't go into gear? Need help!
So yesterday morning I went to go somewhere and I turned on my truck and put it in reverse, but when I stepped on the gas the engine only revved and I did not move anywhere, the same thing happens in all gears. I've tried multiple times throughout the day yesterday and its still happening. Only... -
4.56 Drop-In Gear Timeline?
Looking to re-gear soon, and was wondering if there was any information out regarding when drop-in 4.56 gears will be released for 4th gens? I was really hoping to get these, but depending on how far out they are I may just opt for the 4.10's at this point in time. Right now running 35's on...- rwalk
- Thread
- Replies: 6
- Forum: Engine & Performance
-
Wheel/Tire Size Choice Help!
Currently have 6" RCX Lift on 35x12.5x20's and those fit fine, but I'm finding that for the off roading that I do, I should have gone with something with more sidewall. These next changes may be a little ways down the roads, but I'd like to get some info before I start looking. So, first... -
Stupid Question about BD Hemi +
I finally got my tuner working after hours on the phone with tech support.. But now the tuner just stays on 24/7? Is there an off button? I have just been unplugging it everytime I shut off the truck which is a pain in the ass.. What does everyone else do?- rwalk
- Thread
- Replies: 2
- Forum: Engine & Performance
-
Build Sheet - Axle Ratio Question
Here is a picture of my build sheet on my 2012 Outdoorsman.. Lists both 3.92 and 3.55 rear axle ratios.. I always thought I had 3.92 until I looked at this, how do I know what I really have- rwalk
- Thread
- Replies: 31
- Forum: General Discussions
-
Rear Diff Protection?
Anyone recommend a skid plate or diff cover for the rear?? I'm getting very confused looking online and seeing all the different sizes and most of them being Dana ##, somebody care to explain? -
Different Ways to Mount a Winch??
Looking to get a winch, but can't afford a new bumper at the time. Want it mounted on the front and know of getting a front hitch receiver as well as this mounting tray Westin MAX Winch Mounting System but I am looking for other options. One thing I thought of was building a mount that would be... -
Muffler Size - need quick answer
Just want to double check that my 2012 1500 Outdoosman (single in single out) with the 4.7 has a 3in/3in muffler size, since I'm in the process of checking out with a new 18" Magnaflow- rwalk
- Thread
- Replies: 9
- Forum: Engine & Performance
-
2012 1500 Ourdoorsman QC 6" RCX, 20x10 Fuel Crank, 35" General Grabber AT2
Just got everything installed, I think it turned out great! Truck looks MUCH bigger in person, and so much more badass! Check out the build thread I just started for pictures: http://www.ramforum.com/f17/rwalks_2012_1500_qc_outdoorsman_build-31105/ -
Rwalk's 2012 Outdoorsman Bully's Performance Build Thread
Current Mods (As of 5/19/14): Suspension: Rough Country 6" Suspension Lift w/ Kicker Bars Bilsteins set @ 1.4" Performance Accessories 3' Body Lift Top Gun Customz 2" Rear Coil Spacers Rough Country Rear Adjustable Upper Control Arms Airlift 1000 Air Bags Wheels/Tires: 40x13.5x17 Yokohama...- rwalk
- Thread
- Replies: 171
- Forum: Member Trucks
