I've been off for a while, but wanted to get back on and let everyone know that I finally was able to clear the codes. I was at SEMA 2021 and spoke to a bunch of techs. One of them was the guy that I spoke to at SEMA 2019 and the reason I went with AR. He gave me his card, asked that I...
Does anyone know if AR was able to get their hands on a truck with the error code? I'm really curious to see if they can figure this out. Believe it or not, my error code has gotten worse. I wouldn't think it would matter, but since weather has cooled and my heated seats and steering wheel...
I get the Parking Light Out error and can't clear it with AlfaOBD. Its something with the voltage because I only get it when the headlights are on and I use a turn signal or high beams. It will come on, then clear, then on, then clear. Super annoying. AlpahRex was no help. When AlfaOBD LED...
I'm having a problem with mine throwing the Park Light Out error. Mine is both sides, with parking or headlights on...and sometimes if I have high beams on with no directional. AlphaRex has tried to help, but their suggestions haven't worked. I think you have the G2's, same as I do. They...
OK...I'll give that a try. It will be tomorrow...we are in the middle of a snowstorm right now and the wifes car pulled garage priority. lol
Thanks, guys...I'll let you know what I learn. I'll make settings, give the truck plenty of time to set, then I'll read the System ID to make sure...
@chrisbh17 I forgot to mention...aside from the DRL voltage setting, I did try to leave the marker voltage at 12.2 with the others at settings you mentioned and HID not set, but still got error. I do think we are going down the right path with voltage settings, just don't know where to go...
I can give that a try. Right now my highs and lows are factory set at the voltages you recommend. My DRL is at 7.4v, but my BCM is set to 'none' for DRL Configuration because the DRL's are not wired through the light wiring and I didn't have DRL's from factory. I will try anything at this...
Yes...I’m setting both sides. Even going into the ‘read’ features to make sure I have settings were I want before testing.
@1500ram12 i can only go down to 12v on front markers.
2014 setting is already at No.
LED Park/Marker to yes and 12.2 voltage gave me error as soon as I turn on headlight. Turned off LED and left voltage at 12.2, light error as soon as I turn on headlights. Factory setting for park lights is 13...is 12.2 where we want to go? I'm assuming we go...
The hyperflash does not come immediately...takes a couple seconds. I would get about 2 -3 blinks and get the parking light error, then the hyperflash with the turn signal error.
For voltage...is that the 'front marker' voltage?
Ok...I took lights out, unhooked load resistors and got same exact errors with all the different LED alfa setting as with them hooked up. I went back into Alfa and changed the HID and other settings to your recommendation and it made it worse. I got the same Parking Light Out error, then it...
It dud not work for me. Actually, with that set to yes, I got more errors. I would get the error as soon I turned my lights on, versus just when I used my directional. I ended up turning it off bc the error would come and go randomly. It’s odd.
Right now I just have the LED turn signals set to...
Not yet. Too much going on today. It’s going to have to be a next weekend project. I just messed with some Alfa settings today. Next weekend I will pull it apart and go back to factory settings and start going one by one and hope it’s an easy fix.
At one point, I had all LED features turned on and that is when I couldn’t pinpoint the problem. It was all over the place, retiring randomly
Reading this thread, it sounds like there are a lot of configs used bc the trucks all respond differently.
No on the HID. I changed that back and the voltages back. But I was wondering...do you think I should maybe change the voltage to the rear lights? I tried putting them to 12.2 and it made it worse. Should I try going back to your previous suggestions and maybe doing rears to 14? The are stock...
Ok. I hate pulling everything apart, but it’s worth a try.
Side note, in case this is any help. I’m still playing with settings as I post. I’ve returned all the settings to factory. If I have just the LED turn lamps setting on, I only get error code when lights are on and I use directional. As...
Ok, guys and gals...reaching out again because I’m close to giving up. I can’t get rid of the B16BF Parking Light Out error. Closest I’ve got is only getting it when lights or parking lights are on and I use directional. I tried changing settings to the suggestions by @1500ram12 but it did not...
Ok...made the settings you suggested. Errors came back. There was a post from @chrisbh17 to try turning on LED Parking Lights if your fix didn't work, which I tried and still get errors. There are some suggested posts to disable a door ajar setting. Any thoughts on that? Reading through, it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.