0-60 times

[ralaubach]

I have considered the tires, but i got a good deal on the rims and tires i have on there, hence the narrow tread. I use to have 305/45r22's. I think once these ones are done i will try and find a 305/45r22 to put on.

 

[cdrice15]

Volant cai, flow master exhaust and super chips performance tune with superchips tranny tune settings. Everything else is stock.

Sent from my Electrify

 

[03MopaRamman]

Congrats on your first Half second Cut. You are faster than a stock Diesel F350 and right beside a new 5.0 F-150. Did you try a 4WD Launch and shift higher than stock Manually?

 

[KGBIGCOUNTRY]

Would say weather has gotten cooler to try to get a new PB but damn if its not 90 and 85% humitity..... some times I hate VA.

 

[THEBAD1]

Before converter swap and 4.56 gears. I need to do a new one.

I see your truck is a 03, what model SuperChip are you running? Mine does not give me 0-60 times?

 

[Oefootball_70]

That's a 3865 pictured.

 

[HemiLonestar]

I see your truck is a 03, what model SuperChip are you running? Mine does not give me 0-60 times?

That's a 3865 pictured.

He is correct. I had a 3715, sold it after I got a (couldn't refuse) helluva deal on a 3865. I wanted the datalogging and eventually I'll need/want the trans tuning (that;s a ways down the road though). Worst part was, right after I sold the 3715 a friend of mine picked p a 2000 5.9 Durango, that programmer would've been perfect for it lol.

 

[03MopaRamman]

I'll drop this off here.

Got a new Truck hugh? Is it Black. Congrats. High 4's is where i want my wagon to be!
Looks like a GC 4WD Time, Great. Danny.

 

[garner]

I'll drop this off here.

What vehicle?

 

[03MopaRamman]

If I am correct then thats a nice improvement over your previous 5.62. I think the way mine is running now I can break into the 5's which if I wasn't so high off the ground here was doable before when I was hitting 6.08 with TC Cam compatability probs. With my new Cam it feels like I just put in a new tranny. Strange. Anyhow nice time Big Guy!

 

[OGsohcHondaLOVE]

Well I did my first 0-60 run on my SC VIVID today! 07 hemi QC BH, Mods are an AEM Brute force CAI with DRY FLOW filter and the 91 octane tune on the VIVID. I also have the resonator after the muffler which i'm sure does nothing! I am also at 4800ft above sea level so I know that is 1 full second slower than at sea level in the 1320', not sure about the 0-60. My time was a 7.1 sec no wheel spin or anything.

 

[03MopaRamman]

Wow your 2000 ft Higher than me. Good Run Though.

 

[OGsohcHondaLOVE]

Thanks man. Wasn't sure if it was a good run or not. I know the elevation plays a big part on NA engines! Wouldn't live anywhere other than the Rocky Mountains though!

 

[OGsohcHondaLOVE]

Anyone know a general idea of 1/4 mile times with a 7.1 0-60 time?

 

[KGBIGCOUNTRY]

15+

 

[OGsohcHondaLOVE]

That's pretty good for my area.

 

[HemiLonestar]

Updated run Xmas Eve (sorry, this was like 2 days before my ship left) with ALOT of wheelspin...

So with traction problems I seemed to have dropped 8/10's at the same speed. According to the programmer I'm hitting 60 at a tick over 6 seconds (5.99 @ 59mph) so that's cool (and down from 6.51). Guess I gotta work on launch technique and/or traction.

 

[OGsohcHondaLOVE]

So I had a local guy here that has been racing for the last 15 or so years at our local track tell me that my truck would run a high 16 - low 17 in the 1/4 here. I had previously posted that my 0-60 was a 7.1 I have AEM Brute Force and S/C VIVID. Does that sound right to you guys?

 

[truckin151]

At your elevation, its probably close. I would think more along the lines of a high 15 to low 16. Only way to really tell is to go out and run a few passes.

 

[HuntinRams]

Has anyone managed to get a sub 5 time with one of these 5.7 QC trucks that has also managed to keep it a dd?