2010 Ram 1500 5.7 small bracket for alternator

[edro2024]

Looking for a diagram showing where this bracket bolts to engine. I have it, but don't remember where it came from. Tia

 

[aszumilo]

I have a 2011. I can look tomorrow and get a pic of where it goes.

 

[aszumilo]

Just looked. I'll be damned if I can find that piece on my truck.

 

[Dredger]

See if this gets you any closer:

Help Part # 53034126aa

Pulled motor out of my 2014 ram 5.7 to replace lifters cam and valve job ..motor back in and trying to figure out whare the alternator and compressor bracket is to be installed mopar part #53034126aa the part is a small diameter size of a pencel 3"long both ends are forked so a one inch bolt...

www.ramforum.com

 

[edro2024]

See if this gets you any closer:

Help Part # 53034126aa

Pulled motor out of my 2014 ram 5.7 to replace lifters cam and valve job ..motor back in and trying to figure out whare the alternator and compressor bracket is to be installed mopar part #53034126aa the part is a small diameter size of a pencel 3"long both ends are forked so a one inch bolt...

www.ramforum.com

Excellent, I think that is it exactly. Thank you!

 

[edro2024]

This is where it fit on my 2010 ram 1500 5.7. just under the alternator, bracing the timing cover and head. Really appreciate the help!