2014 Rancho

[na79te]

I received my rancho quick lifts on Monday. Going to install some time this weekend, but first I just wanted to make sure no one was having to replace UCAs on 2014 models with this setup.

 

[iam_canadian22]

Late model 13 here and no issues yet, lots of quick studder bumps pot holes on side roads hitting parts of the highway that were cut to resurface at 110 kms hr, im sure some of those would have caused it if it were to happen even more so since some are reporting popping on install with leveling kits


Sent from my iPhone using Tapatalk

 

[na79te]

Anyone else done it on a 2014 with no issues? Gonna install in the morning, just wanted some more input.

 

[h2oman]

If it happens then you can swap the uca's. Go for it.

 

[na79te]

If it happens then you can swa Pl the uca's. Go for it.

I haven't ordered any UCAs. I'm hoping that since the Ranchos are the same length as stock that it will be fine.

 

[HemiRoar]

i'd put on mevotechs. they're not expensive and you can install it all at the same time. takes the guess work out.

 

[na79te]

The instructions aren't very clear on these. How do I know what settings to use to level?

 

[jbr]

The instructions aren't very clear on these. How do I know what settings to use to level?

The Quiklift ones are not adjustable for height. The knob for for dampening.

 

[na79te]

So what does everyone recommend setting them at?

 

[Caldwell]

thats hard to answer because everyone has a different taste. I would say go with a mid setting to get an idea of how they feel.

 

[iam_canadian22]

i set mine on 3 and find the ride very smooth, roads are really rough up here and they made a huge difference, one of these days I will get around to playing with the settings to see the difference and find a preference lol

 

[na79te]

I set mine at 5. Smooth ride. Truck actually bounces out of bumps rather than feeling bottomed out like it does with stock.