2018 with 37's on Stock Suspension

[Odin]

Mine ( the red one ) has 37" but is a 2019.
The white behind has stock 33"
The white in driveway has 35" and 1.5" wheel spacers.

All are stock



View attachment 196597

I think I know the answer to this, but I'll ask anyways. Did you have to take thr splash guards off for the 37s to fit the front without rubbing on them during turns? I don't see them in your pictures but didn't know if that's why they were removed.

Sent from my SM-G960U using Tapatalk

 

[Breaker Alex]

@Odin

I did remove the front under bumper lining to gain clearance but that was before installing the 37s ...

I'm not sure it is necessary tough.
Is that what you mean?

Nothing else was tempered in or near the wheel well.

 

[Odin]

@Odin

I did remove the front under bumper lining to gain clearance but that was before installing the 37s ...

I'm not sure it is necessary tough.
Is that what you mean?

Nothing else was tempered in or near the wheel well.


View attachment 198397

No, I'm referring to the splash guards at the back of the wheel well to keep stuff from kicking up on the rocker panels so the tires don't rub on them. Not sure if they will or not that's why I'm asking

Sent from my SM-G960U using Tapatalk

 

[Breaker Alex]

No, I'm referring to the splash guards at the back of the wheel well to keep stuff from kicking up on the rocker panels so the tires don't rub on them. Not sure if they will or not that's why I'm asking

Sent from my SM-G960U using Tapatalk

Oh, I did not remember about those!
Yes they're still there.

 

[trdt44]

Here is my '19 with stock suspension and 37s. Figured it may still be helpful. I have a tiny bit of rubbing at the back of the front opening. I will be taking a heat gun to the liner. Bfgs do run a little small, these measure 36". I changed the speedometer and TPMS threshold with the alfaobd app.

ETA. I am running the Method 315 wheels with Ram specific offset. I changed out stainless lip bolts to black bolts.

 

[Odin]

Oh, I did not remember about those!
Yes they're still there.

View attachment 198501

Those aren't the splash guards. Unless they totally changed them on the 2019. Lol. I'm gonna assume they didn't come on your truck. Here's mine as a reference. It's the plastic piece that sticks down behind the front wheel. But looking at the two pics side by side I'm gonna go with they need to be removed for 37s.

Sent from my SM-G960U using Tapatalk