285/70 on factory 8 Lug ...?

[MikeG71]

Quick question, will a 285/70 R17 tire fit on a factory 8 Lug?

I’m in the market for tires and want to move the best of the 4 to my spare. I’m pretty sure the current spare is the original from 2006.

Next question, will a 285 fit under the truck?

Thanks all!

 

[Quyonmob]

Yes and yes from every 3rd Gen 2500 I have ever seen here.

 

[PhilW55]

That's what I'm running for both sets, AT and MT.

Sent from my Pixel 2 using Tapatalk

 

[MoPowered]

That’s only a 33” it should fit without issue. And what’s the question about 8 lug, bolt pattern I assume? If so that doesn’t have anything to do with fitting tires.

 

[MikeG71]

Thanks gents! I have a set of 17x9 Raceline’s on my rig, I just wanted to make sure that the spare was good to go with that size tire.

@MoPowered I just said 8 Lug so whoever replied would know I was referring to a 2500/3500 wheel.

Thanks again!

 

[MoPowered]

No worries, you’re welcome and thank you for your Service, what was your MOS if you don’t mind me inquiring?

 

[RamminMopar]

If 4x4 you can fit 35x12.5 on factory rims with minimal rubbing

 

[MikeG71]

If 4x4 you can fit 35x12.5 on factory rims with minimal rubbing

Truck is already running the 285's, it's the spare that I wanted to make sure will still fit under the truck with the 285 on it. I was pretty certain the tire would fit the factory rim but I wanted to ask the experts first.

 

[MikeG71]

No worries, you’re welcome and thank you for your Service, what was your MOS if you don’t mind me inquiring?

And thank you for yours Sir. 63A, Abrams Systems Maintainer which changed to 91A just before I got out. I was at Carson for almost 7 yrs, about a year and a half at Riley, and 3 Iraq deployments. What was your MOS?