6.4 intake manifold swap
- Thread starter crazykid1994
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
smoothee
Senior Member
- Joined
- Jun 6, 2012
- Posts
- 1,334
- Reaction score
- 703
- Location
- St. John's, NL
- Ram Year
- 2011
- Engine
- Hemi 5.7
Good stuff. Just ordered both, but manifold on backorder 6-8 weeks of course.
Does anyone know a source for the injector spacers in Canada? MMX are smoking crack with their shipping rates. Otherwise I'll have to tune for the 6.4 injectors I guess
Does anyone know a source for the injector spacers in Canada? MMX are smoking crack with their shipping rates. Otherwise I'll have to tune for the 6.4 injectors I guess
smoothee
Senior Member
- Joined
- Jun 6, 2012
- Posts
- 1,334
- Reaction score
- 703
- Location
- St. John's, NL
- Ram Year
- 2011
- Engine
- Hemi 5.7
Yeah that's what I'll probably end up doing. Have the HP Tuner and have been meaning to get a tune from FRP for a long time anyway
danielmid
Senior Member
- Joined
- Mar 23, 2018
- Posts
- 1,580
- Reaction score
- 2,962
- Location
- Southeast WI
- Ram Year
- 2015 Sport 4x4
- Engine
- Hemi 5.7
Is that tappable for the catch can fitting?
danielmid
Senior Member
- Joined
- Mar 23, 2018
- Posts
- 1,580
- Reaction score
- 2,962
- Location
- Southeast WI
- Ram Year
- 2015 Sport 4x4
- Engine
- Hemi 5.7
MegaHertz
Member
@crazykid1994 With the 6.4 intake manifold, do you have to get an SRV controller, like MMX sells, in order for the active runners to work on the 5.7?
6.4L HEMI Intake Manifold SRV Controller by MMX
6.4L HEMI Intake Manifold SRV Controller by MMX
www.modernmusclextreme.com
OP
OP
crazykid1994
Senior Member
No. your truck should already have it
- Joined
- Aug 29, 2022
- Posts
- 3,228
- Reaction score
- 7,951
- Location
- Ontario Canada
- Ram Year
- 2023 Warlock
- Engine
- 5.7
Giggity!
Love Quagmire!
MegaHertz
Member
So the active runners will automatically open and close without any additional parts or tuning? Do you know if the controller is native to the intake manifold or if the pcm is sending a signal to open or close? Because the 5.7 manifold doesn't come with active runners right? So there must be a passive controller on the 6.4 manifold activating the runners based on RPMs or something it is reading from the PCM?
Daw14
Senior Member
- Joined
- Nov 29, 2017
- Posts
- 3,429
- Reaction score
- 5,477
- Location
- South Florida
- Ram Year
- 2014
- Engine
- 5.7 hemi
Factory 5.7 has active runners , you just need an extension harness or make longer yourself. The 5.7 is in the rear and 6.4 in the front .
- Joined
- Feb 9, 2025
- Posts
- 760
- Reaction score
- 1,475
- Location
- Louisiana
- Ram Year
- 2026 Limited
- Engine
- 3.0L TT H.O.
Finally found a 6.4 (truck) intake manifold for a good price on ebay. Also picked the AF Dynamics cold air intake. Curious if anybody knows where the IAT sensor will plug in and if I'll need to make an extension for it?
- Joined
- Feb 9, 2025
- Posts
- 760
- Reaction score
- 1,475
- Location
- Louisiana
- Ram Year
- 2026 Limited
- Engine
- 3.0L TT H.O.
Do you happen to remember what the bolt size is for the EGR block off??
- Joined
- Feb 9, 2025
- Posts
- 760
- Reaction score
- 1,475
- Location
- Louisiana
- Ram Year
- 2026 Limited
- Engine
- 3.0L TT H.O.
You da man, appreciate it!
Similar threads
