Javigo1971
Junior Member
Hi guys just did my radio swap on my 2014 1500 tradesman 5.7
Installed a hvac module everything woks fine but no cold air any ideas... The number 10 wire is receiving 5 volt instead of 12 or 11.6 to turn on the compressor.. Only is cold whe. Replace with old ariginal MTC bezel with 7fan speed... Any ideas thanks
First picture with ATC
Second picture with MTC
Installed a hvac module everything woks fine but no cold air any ideas... The number 10 wire is receiving 5 volt instead of 12 or 11.6 to turn on the compressor.. Only is cold whe. Replace with old ariginal MTC bezel with 7fan speed... Any ideas thanks
First picture with ATC
Second picture with MTC