All Repair Parts @ Employee Cost!

[HEMIMANN]

Benny,
Are these floor mats already on sale or do you have lower employee pricing?

Part Number: 82215584AB

 

[retired]

Benny any chance of the part numbers for the plastic blind rivets that are used on the front RAM mudflaps for a 2020 Power Wagon.

 

[5pt7BigHornSC]

Sure

LF 1WD63TX7AA
RF 1WD62TX7AA
LR 1WD63TX7AA
RR 1WD62TX7AA


I will need the VIN for the seat trim please

- Benny

Benny, thank you for getting back tome so quick. VIN is 1C6RR7NT0JS182496.

 

[AllMoparParts.com]

Benny,
Are these floor mats already on sale or do you have lower employee pricing?

Part Number: 82215584AB

This is the current price but I will send you a code to use

https://www.allmoparparts.com/sku/82215584ab.html

- Benny

 

[AllMoparParts.com]

Benny any chance of the part numbers for the plastic blind rivets that are used on the front RAM mudflaps for a 2020 Power Wagon.

The part numbers for the hardware used in the accessory splash guard kit in the link are not shown however if you can pickup an assortment kit relatively cheap online
http://starparts.chrysler.com/info/default/K6862972.pdf

It looks like the bottom rivet is metal while the uppers are plastic.

-Benny

 

[AllMoparParts.com]

Benny, thank you for getting back tome so quick. VIN is 1C6RR7NT0JS182496.

No problem, The shield is part # 5NN96DX9AA

Please let me know if you have any other questions.
Thanks,
-Benny

 

[retired]

The part numbers for the hardware used in the accessory splash guard kit in the link are not shown however if you can pickup an assortment kit relatively cheap online
http://starparts.chrysler.com/info/default/K6862972.pdf

It looks like the bottom rivet is metal while the uppers are plastic.

-Benny

do you have the part number of the assortment kit? thanks. the generic plastic rivets that I have found are just a little undersized compared to what was in the kit.

 

[AllMoparParts.com]

For about 30 bucks I would pick this up https://www.amazon.com/ASSORTED-PLA...CTB02NJ1GES&psc=1&refRID=R3WH7BC06CTB02NJ1GES

You can probably replace the lower rivet with one of these plastic ones as well

Please let me know if you have any other questions.
Thanks,
-Benny

 

[retired]

For about 30 bucks I would pick this up https://www.amazon.com/ASSORTED-PLA...CTB02NJ1GES&psc=1&refRID=R3WH7BC06CTB02NJ1GES

You can probably replace the lower rivet with one of these plastic ones as well

Please let me know if you have any other questions.
Thanks,
-Benny

I ordered that but those and the rivets are slightly too small. The Mopar ones are just a bit bigger.

 

[AllMoparParts.com]

I ordered that but those and the rivets are slightly too small. The Mopar ones are just a bit bigger.

Hmm, the most common mopar plastic rivet used is a 6500911 which is 6.35mm (1/4") diameter so I would have figured the 6.6mm in this kit would suffice. If you can measure the hole or one of the original rivets amazon sells all sorts of sizes.

-Benny

 

[retired]

Hmm, the most common mopar plastic rivet used is a 6500911 which is 6.35mm (1/4") diameter so I would have figured the 6.6mm in this kit would suffice. If you can measure the hole or one of the original rivets amazon sells all sorts of sizes.

-Benny

funny thing is I installed all the rivets no problem and the last one did not tighten enough so I had to snip it out. the holes are drilled with a 1/4" drill bit per instructions. the ones that come with the mudflaps fit the 1/4 hole very snug. the biggest ones in that kit the ears do not expand enough to keep from pulling thru the hole. Hard to explain but seems like the mopar ones are a bit different.

 

[AllMoparParts.com]

funny thing is I installed all the rivets no problem and the last one did not tighten enough so I had to snip it out. the holes are drilled with a 1/4" drill bit per instructions. the ones that come with the mudflaps fit the 1/4 hole very snug. the biggest ones in that kit the ears do not expand enough to keep from pulling thru the hole. Hard to explain but seems like the mopar ones are a bit different.

Ive worked with them before and know what you mean, The expandable portion may not be long enough so when its riveted it's not as wide. If you want to grab a few of the mopar ones from your local dealer the part # is 6500911 , The list price is 7.95 each!

- Benny

 

[retired]

thank you.

 

[Austen]

Benny, I've looked before and had trouble finding OEM vinyl flooring for a 2016 Ram 2500. Would you be able to source the part number for me? Thanks in advance!

16' CCSB 4X4 G56 2500 6.7 SLT, CTT tuning, UAQ, Customtronix Enzo, Single Zone ATC

 

[AllMoparParts.com]

Benny, I've looked before and had trouble finding OEM vinyl flooring for a 2016 Ram 2500. Would you be able to source the part number for me? Thanks in advance!

16' CCSB 4X4 G56 2500 6.7 SLT, CTT tuning, UAQ, Customtronix Enzo, Single Zone ATC

Sure but I need to know if you have the Rear Air Suspension option?

-Benny

 

[Austen]

Sure but I need to know if you have the Rear Air Suspension option?

-Benny

No I do not have rear air suspension

16' CCSB 4X4 G56 2500 6.7 SLT, CTT tuning, UAQ, Customtronix Enzo, Single Zone ATC

 

[AllMoparParts.com]

Ok, This can be ordered here https://parts.allmoparparts.com/oem-parts/mopar-floor-mat-6nt62dx9ac

Use code 50SHIP

Please let me know if you have any other questions.
Thanks,
-Benny

 

[Austen]

Ok, This can be ordered here https://parts.allmoparparts.com/oem-parts/mopar-floor-mat-6nt62dx9ac

Use code 50SHIP

Please let me know if you have any other questions.
Thanks,
-Benny

Thanks Benny! I greatly appreciate your help.

16' CCSB 4X4 G56 2500 6.7 SLT, CTT tuning, UAQ, Customtronix Enzo, Single Zone ATC

 

[HappilyUnstable]

Benny,
I need to pull my hvac as my evaporator has clogged up due to lack of air filter. Thought I should replace the evaporator/heater core and the recirc actuator and door while I'm in there (they are broke). Can you give me a quote on those 4? 2015 RAM 2500 CTD crew.
Thanks!
Alex

 

[AllMoparParts.com]

Benny,
I need to pull my hvac as my evaporator has clogged up due to lack of air filter. Thought I should replace the evaporator/heater core and the recirc actuator and door while I'm in there (they are broke). Can you give me a quote on those 4? 2015 RAM 2500 CTD crew.
Thanks!
Alex

View attachment 235406

Hi Alex,

Sure but please PM me your VIN and Email address and I will send you a quote.

- Benny