ameldorf 19 Ram Classic Express

[ameldorf]

Couple projects came in:

Ready for first oil change (Redline 5w-30 not in pic)


Diff cover



Sent from my iPhone using Tapatalk

 

[ameldorf]

Diff cover on


Fun tidbit: Freedom Offroad upper rear control arms won’t fit with the IHC relocation brackets. The bushing diameter is too large to fit in the axle side area.


Sent from my iPhone using Tapatalk

 

[ameldorf]

Only missing a black headliner now


Also found this “u” shaped part on the frame smacks the top of a larger than stock differential cover.



Not anymore as you can see.


Sent from my iPhone using Tapatalk

 

[ameldorf]

Added Bushwacker Trail Armor rocker guards. They don’t make regular cab specific but the fronts fit for crew cabs. I cut a rear up to cover the cab corner but it looked weird so I took it off.

Should add protection either way.





Sent from my iPhone using Tapatalk

 

[ameldorf]

eBay catch can




Sent from my iPhone using Tapatalk

 

[ameldorf]

Airaid Jr intake tube



Had a K&N drop in filter prior, but the Airaid that came with the kit was dry and had way deeper pleats, so I put it in.


Sent from my iPhone using Tapatalk

 

[ameldorf]

First oil change and added remote filter kit


Also added Hellwig rear swaybar


Had to remove the Freedom Offroad panhard due to clearance with diff cover. Gonna try a Spohn non-adjustable.


Sent from my iPhone using Tapatalk

 

[ameldorf]

Bit the bullet and ordered a supercharger. Went with Edelbrock/Eaton TVS 2300 kit

Also ordered a Walbro 450 and new fuel pump assembly. Gonna see if I can figure that out. I’ve modded and fit dual pumps on other platforms so should be ok. Should be way overkill for anything I’m gonna do on stock block.

Finally AEM afr gauge and column pod to monitor.

After all that, some tune time at the shop I take stuff.

 

[tipnitty]

Making some great progress! Excited to see the supercharger install! I should have done a filter relocation long ago. look way more convenient in the new location.

 

[ameldorf]

Thanks!

Forgot... I ordered a one piece driveshaft and Core rear control arms to finish suspension.


Sent from my iPhone using Tapatalk