Bed Extender like OEM Ford

[ss12108]

Anyone know of any after market fold away bed extenders similar to what Ford offers? https://youtu.be/bmpiY56Qr10

I've seen the one piece AMP research version but just curious if there's a similar "stowable" version available for my 2013 1500.

Sent from my Pixel XL using Tapatalk

 

[smurfs_of_war]

Subbed. I miss that from my 1500.

Sent from my SM-G925W8 using Tapatalk

 

[SitKneelBend]

Ramboxes beds come with it, but not quite so compact...

Sent from my HTC One M9 using Tapatalk

 

[ss12108]

Ramboxes beds come with it, but not quite so compact...

Sent from my HTC One M9 using Tapatalk

I saw that but unfortunately I can't find anything similar for beds without the ramboxes. It's a pretty simple and well thought out design...I'm surprised no one has created a similar after market version of what Ford has.

Sent from my Pixel XL using Tapatalk

 

[ScottFL]

Wow, I just started looking for a bed extender and would love a style like this.

 

[quietpeen]

that's a cool design

 

[Farmer Fran]

Ramboxes beds come with it, but not quite so compact...

Sent from my HTC One M9 using Tapatalk

No but I can also put it in multiple postilions throughout the bed as well as an extender

muuuuhahahahaha!

 

[SitKneelBend]

No but I can also put it in multiple postilions throughout the bed as well as an extender

muuuuhahahahaha!

Or remove it altogether...

Sent from my HTC One M9 using Tapatalk

 

[Divi]

looks like its three holes one each side of the truck bed. you could probally get away with using a rivnut for the middle hole.

watch this for install

https://www.youtube.com/watch?v=7Tv1xfYqy40


can buy the ford kit here.

https://accessories.ford.com/black-bed-extender-9324.html



looks like its made of cheap plastic though, and the only concern I would have is the width of the beds between ford and ram.

 

[ocwill1]

I had an F250 with the bed extender and measured the inside of the bed on each. It could be done, maybe a couple of washers would have done it. The Ford bed was a hair wider. Middle hole is where the pivot bolt went through. Top holes are really not necessary, they were to lock it in so it could not move, but I never used them.. Definitely doable though..

I had thought about doing it to mine, but sold it to a friend with an F150 (same part number)..