Bils/zone uca/ stock rims with 35's?

[Silv14ram]

Just ordered the 5100's. To be safe I ordered the Zone uca's. I am going to set the bils to the 2.75 setting. I want to run the Firestone destination mt in a 35/12.50/20 on the stock rims. I have searched and I see some people use a spacer and some don't. Some say the tire is too close to the uca. That is with factory uca's. I can't find anything with the Zone Uca. If a spacer is needed what ones do I buy? Thanks

 

[AustinB]

 

[Silv14ram]

Thank you for that knowledgeable reply. So are you saying I'm gonna need a spacer? Lol. I know the uca's are probably a waste but I like overkill better than taking a chance.

 

[GzNutz]

^^A reference to the cost difference between zone and mevotech.

UCAs are a safe place to spend money.

 

[AustinB]

You could very well need a 1/2" spacer.. maybe not.

 

[brandonjansen]

You will likely need spacers. It depends on the mounted width of the tires but with the Zone UCA's I expect they'll be required. Motorsport Tech's 10mm hub centric spacers are the ones to go with.