Coramie
Senior Member
- Joined
- Jul 20, 2018
- Posts
- 202
- Reaction score
- 206
- Location
- Lago Vista, Tx
- Ram Year
- 2018
- Engine
- Hemi 5.7
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
That’s around what I was thinking. I’m pretty sure they can pull that out and fix up the paint. I’m in central Tx but $2-3k I think would be reasonable. I have Maxcare warranty so I guess I’ll need to go to one of the 3 approved body shops here just to keep that from biting me later.California probably 2-3K
Damn, I sure hope it’s not that much. I’m not planning on filing an insurance claim but $6-7k is too high not to.6-7k my guess, I had similar damage and those dented cab corners charged a lot of shop hours and new metal required on bed. I think you got 1.5k just in paint and paint prep
Sent from my SAMSUNG-SM-N910A using Tapatalk
I had similar damage a few years ago on my Silverado from a yellow parking lot pole on the same side....because of the body lines in the bed and metal creasing damage and there are stiffners behind the bed fender. The shop found a donor bed to cut up and patch in the metal.Damn, I sure hope it’s not that much. I’m not planning on filing an insurance claim but $6-7k is too high not to.
I hope you’re right! The fence is one of those white plastic ones. I was so tired I just figured I scraped it a little and it would give if I kept going. Aaannndddd I was wrong lolDamn. What kind of fence do you have? Lol... I'm curious.
The right shop will get the bedside panel for 500, a new fender flare for 100 maybe. Paint and prep on white, 800 bucks tops. Then the door is another 800 just because the shop will have to blend it up, and to do the dent removal they can get a good paintless guy in. I'm gonna go between 2.5-3.2k