Column shifter to Console shifter P/N

[TheEnder]

Does anyone have the part numbers for everything that’s needed to swap a column to a floor shifter? I like the look of a floor shifter a tad more. Thanks.


Sent from my 2013 Magnum 4.7L V8

 

[Fast69Mopar]

Does anyone have the part numbers for everything that’s needed to swap a column to a floor shifter? I like the look of a floor shifter a tad more. Thanks.


Sent from my 2013 Magnum 4.7L V8

I believe these are the part numbers you are looking for...

52109706AC LEVER MANUAL CONTROL

52104371AG BRACKET SHIFT CABLE

52855956AG GEARSHIFT CONTROL CABLE

Steering Column Cover W/console shift, Gray 1GE44XDVAB

The only other pieces needed are a used console and console radio bezel to make it match and line up with the instrument panel center bezel.

Take a look at those part numbers and I think you'll find what you are looking for. Good luck with the swap. It looks really good.

 

[Jerzey111]

i dont have part #s but i've done this to my 2014. let me know if you have any q. it was real easy. Running the wire from trans was prob the most difficult but all you have to do is to "find its spot" usually it clips somewhere

 

[TheEnder]

i dont have part #s but i've done this to my 2014. let me know if you have any q. it was real easy. Running the wire from trans was prob the most difficult but all you have to do is to "find its spot" usually it clips somewhere

Thanks y’all. I’m in the middle of swapping my SLT trim for a Limited trim. This will come in handy!


Sent from my 2013 Magnum 4.7L V8