heavyhemi55
Junior Member
Why does my cruise control work only once in a while?
Cruise control works some times
- Thread starter heavyhemi55
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Dean2
Senior Member
- Joined
- Jun 17, 2021
- Posts
- 4,461
- Reaction score
- 8,959
- Location
- Near Edmonton
- Ram Year
- 2021 2500
- Engine
- 6.4
Like so many Millennials, it prioritizes work life balance and prefers to work from home.
At least expend the time and effort to detail under what conditions it works and what conditions it doesn't. There are potentially many causes. Remote diagnosis is hard enough, without any details it is impossible.
At least expend the time and effort to detail under what conditions it works and what conditions it doesn't. There are potentially many causes. Remote diagnosis is hard enough, without any details it is impossible.
- Joined
- Aug 2, 2018
- Posts
- 25,918
- Reaction score
- 56,727
- Location
- Central Texas
- Ram Year
- 2019 Bighorn, 4 X 4, 3.21 rear, Bright Flame Red Pearl Coat, Mopar tonneau cover,Westin Bed rug
- Engine
- Hemi 5.7, Non E Torque
^^^*. This. ^^^^Like so many Millennials, it prioritizes work life balance and prefers to work from home.
At least expend the time and effort to detail under what conditions it works and what conditions it doesn't. There are potentially many causes. Remote diagnosis is hard enough, without any details it is impossible.
Internet guessnosis requires at least basic information.
- Joined
- Mar 20, 2016
- Posts
- 12,372
- Reaction score
- 21,560
- Ram Year
- 2015
- Engine
- 3.0 EcoDiesel
FYI, just report the duplicate threads instead of posting about in the thread. Forum staff can delete or merge threads and then the posts are relative to the topic.
Daw14
Senior Member
- Joined
- Nov 29, 2017
- Posts
- 3,434
- Reaction score
- 5,498
- Location
- South Florida
- Ram Year
- 2014
- Engine
- 5.7 hemi
A check engine light will prevent it from engaging.
Frank Smith
Member
Here is what I have found with BOTH my 2015 EcoD and my 2003 2500. I can make the cruse control activate if I hold for 10 sec. or so either the RES key or the SET key. It would seem that the CC key can't activate until one of either the RES or SET keys are "released". I didn't believe this process when I first saw it on some website a few months ago, but it does work. Give it a try and see if it can work in your situation.
62Blazer
Senior Member
As stated above some details would help.
But in general a lot of people, including myself, report that the cruise on/off button on the steering wheel sporadically works. About 25% of the time when I hit the button to turn on the cruise it doesn't work. I'll smack the back of the steering wheel and it will come on.......I was skeptical when I first read that comment also but it almost always works on mine. I need to take the time to pull the steering wheel cover off and take a look.
But in general a lot of people, including myself, report that the cruise on/off button on the steering wheel sporadically works. About 25% of the time when I hit the button to turn on the cruise it doesn't work. I'll smack the back of the steering wheel and it will come on.......I was skeptical when I first read that comment also but it almost always works on mine. I need to take the time to pull the steering wheel cover off and take a look.
Dean2
Senior Member
- Joined
- Jun 17, 2021
- Posts
- 4,461
- Reaction score
- 8,959
- Location
- Near Edmonton
- Ram Year
- 2021 2500
- Engine
- 6.4
OP posted Sat Aug 2nd, at 08:03. Hasn't been back since Sat at 08:07
Monday Aug 11th 12:30 p.m. - still no return by OP.
Monday Aug 11th 12:30 p.m. - still no return by OP.
Last edited:
bcbouy
Senior Member
- Joined
- Nov 12, 2014
- Posts
- 1,911
- Reaction score
- 1,553
- Location
- pitt meadows/100 mile house
- Ram Year
- 2021 power wagon
- Engine
- hemi
mine stopped working when my front camera failed.
