huff2462
Senior Member
I was apprehensive as can be, but I debadged the truck in about 20 mins this afternoon.
I'd highly recommend it to anyone as a quick, simple mod. I basically used the technique found in the "How to debadge the right way" thread...
After using the fishing line, I heated up the panel with a hair dryer (it's cold here), pulled it off, then used an aerosol can of 3M Adhesive Remover and a rag to remove any residue.
-
'13 RAM 1500 Big Horn, 5.7L Hemi, 8-sp trans, 4x4, 3.21 gears
I'd highly recommend it to anyone as a quick, simple mod. I basically used the technique found in the "How to debadge the right way" thread...
After using the fishing line, I heated up the panel with a hair dryer (it's cold here), pulled it off, then used an aerosol can of 3M Adhesive Remover and a rag to remove any residue.
-
'13 RAM 1500 Big Horn, 5.7L Hemi, 8-sp trans, 4x4, 3.21 gears