Dodge Lean?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

joshj84

Member
Joined
May 19, 2013
Posts
98
Reaction score
52
Location
Orange, CA
Ram Year
2015
Engine
5.7
Dodge Lean or Bad Bilstein install? lol...wtf

Hey guys just a quick question...

I Just got a bilstein leveling kit and have it set at 2.1" but i've noticed the driver side is 1" higher than the passenger side. Granted I had 20 miles left on the gas tank so I'm not sure how much that would effect things. I did fill up this morning and think the difference is a little smaller but haven't been able to measure it yet.

*** See pics below
 
Last edited:

SilverStreak88

Senior Member
Joined
Jul 20, 2015
Posts
3,950
Reaction score
1,610
Location
Houston, Texas
Ram Year
2007
Engine
5.7 Eco Gasser
Shouldn't make a difference where your gas gauge is... it should always sit evenly on both sides. I have the Dodge Lean, but the original Dodge Lean is the left rear leaf spring sagging. I've only heard of a few cases where someone had it on the passenger side and haven't really heard anyone with a 4th Gen having the lean. Definitely measure it out because it be an optical illusion.
 
OP
OP
J

joshj84

Member
Joined
May 19, 2013
Posts
98
Reaction score
52
Location
Orange, CA
Ram Year
2015
Engine
5.7
Oh I measured it one side is 39" and one side is 38" hah...
 

SilverStreak88

Senior Member
Joined
Jul 20, 2015
Posts
3,950
Reaction score
1,610
Location
Houston, Texas
Ram Year
2007
Engine
5.7 Eco Gasser
Oh I measured it one side is 39" and one side is 38" hah...
Did you measure front and back? I know I'm an inch low in the back, but it brings my front down about a 1/4, maybe it's back sitting a lil lower or (I find highly unlikely, but possible) a bad Bil on one side.
 
OP
OP
J

joshj84

Member
Joined
May 19, 2013
Posts
98
Reaction score
52
Location
Orange, CA
Ram Year
2015
Engine
5.7
Uhh... I dont think this should look like this....

First pic is driver side and second is passenger...

So I told them to set these at 2.1 does that mean one is at 2.8 and the other is at 1.5?
 

Attachments

  • image1 (1).jpg
    image1 (1).jpg
    90.1 KB · Views: 81
  • image2.jpg
    image2.jpg
    84.6 KB · Views: 87
OP
OP
J

joshj84

Member
Joined
May 19, 2013
Posts
98
Reaction score
52
Location
Orange, CA
Ram Year
2015
Engine
5.7
Looks like driver side is on the very top ring on the Bilstein and the Passenger side is on the 2nd or so from the bottom?
 

SilverStreak88

Senior Member
Joined
Jul 20, 2015
Posts
3,950
Reaction score
1,610
Location
Houston, Texas
Ram Year
2007
Engine
5.7 Eco Gasser
By the pics, it appears that they are in fact set different and that is your result of lean.
 

xrsman

Senior Member
Joined
Sep 9, 2013
Posts
4,473
Reaction score
1,319
Location
Ontario
Ram Year
2016
Engine
3.0 Ecodiesel
That's a bummer! I'd go right back and have them fix it
 

EagleChief

Senior Member
Joined
Jan 6, 2015
Posts
1,942
Reaction score
968
Location
Oklahoma
Ram Year
2014 Big Horn
Engine
5.7 Hemi
That sucks. I mean, seriously, how can you mess that up? Can't find good help, anywhere... anymore.
 
OP
OP
J

joshj84

Member
Joined
May 19, 2013
Posts
98
Reaction score
52
Location
Orange, CA
Ram Year
2015
Engine
5.7
The best thing was the guy that was fixing it / reinstalling it was like.. Have you been out offroading this thing on some big jumps? I'm like lol no...


Yes lets deflect that you messed this up in the start somehow.
 
OP
OP
J

joshj84

Member
Joined
May 19, 2013
Posts
98
Reaction score
52
Location
Orange, CA
Ram Year
2015
Engine
5.7
The best thing was the guy that was fixing it / reinstalling it was like.. Have you been out offroading this thing on some big jumps? I'm like lol no...


Yes lets deflect that you messed this up in the start somehow.
 
OP
OP
J

joshj84

Member
Joined
May 19, 2013
Posts
98
Reaction score
52
Location
Orange, CA
Ram Year
2015
Engine
5.7
well I haven't tried to leave yet as they're still working on it at 3+ hrs now... waiting to see if they try to hand me a bill at the end of this.
 
Back
Top