Driver Door Switch Assembly question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

caltx01

Member
Supporting Member
Joined
Feb 10, 2019
Posts
65
Reaction score
62
Location
Tyler, Texas
Ram Year
2014
Engine
Pentastar
In my 2014 RAM 1500 QC the front driver side door switch assembly has controls for the power mirrors that are not illuminated. I have seen some switch sets where these switches are lit. Is there a direct plug and play switch assembly for my truck which has these switches lit or are there additional wiring considerations to address?

Thank you!!
 

Mpgrimm2

Senior Member
Preferred Vendor
Military
Joined
Mar 30, 2014
Posts
6,094
Reaction score
4,174
Location
SC
Ram Year
2022 Ram 1500 (5th Gen)
Engine
5.7L
Last edited:

Ricks Ram

Senior Member
Joined
May 1, 2015
Posts
4,411
Reaction score
3,388
Ram Year
2014
Engine
Hemi 5.7
Not one has found one for the 13-15 trucks yet with the 2 plug connector of it exists.

16+ use the single connector compatible with the fully lit jeep Grand Cherokee overland switch assy.
Reference - DIY: 2013-18 (19 classic) Power Fold Mirror upgrade/Notes.

M² Mods.
I was actually looking for a door harness from a 16 up truck to see if I could install it in my 14 so I run the single connector illuminated Master Switch but didn't come across one.

Sent from my SM-G981U1 using Tapatalk
 
Top