Dyno

[cam101]

I am going to have my truck dynoed. The only change I have made is Carven competitor muffler. So i will be able to give a realistic number for stock numbers.

Sent from my SM-G965U using Tapatalk

 

[LeesEvoX]

ooo lets all place our bets..

Can you tell us if it it a Mustang Dyno, or a Dynojet?

If using a mustang dyno, my guess is: 330WHP, and 350Tq

If using a Dynojet, my guess will be: 345WHP, and lets say 365Tq.

 

[Ohio5pt7]

I'm saying
309hp 345tq on mustang
329hp 363tq on dynojet

Edit: since it's 3.21s and the stock 20s with 33s I'll say.

318hp 348tq mustang
335hp 366tq dynojet

Sent from my KYOCERA-E6920 using Tapatalk

 

[Gamedog]

Nice.

My guesses are:

Mustang: 324 hp and 344 tq

Dynojet: 333 hp and 358 tq

Wait - any stickers on the truck? These always add hp...

 

[Ohio5pt7]

What size tires and gears?

Sent from my KYOCERA-E6920 using Tapatalk

 

[RedSRT4Me]

290/330

 

[cam101]

Its going to be a dynojet. When i had mustangs this shop would perform all the work.

Tires are stock and gears are stock.

Sent from my SM-G965U using Tapatalk

 

[Ohio5pt7]

Its going to be a dynojet. When i had mustangs this shop would perform all the work.

Tires are stock and gears are stock.

Sent from my SM-G965U using Tapatalk

Stock 3.21 or 3.92? Are they stock 20s or 17s?

Sent from my KYOCERA-E6920 using Tapatalk

 

[cam101]

Stock 3.21 or 3.92? Are they stock 20s or 17s?

Sent from my KYOCERA-E6920 using Tapatalk

Stock 3.21 stock 20s

Sent from my SM-G965U using Tapatalk

 

[Tim Garceau]

Baseline should be right around 320 with +/- 20 depending on conditions and testing method variables in 6th gear.

 

[cam101]

The results from the dyno are as follows:
315.64 hp
341.50 lbs
Not bad at all. I will post a picture of the graph later.

Sent from my SM-G965U using Tapatalk

 

[Ohio5pt7]

I'm saying
309hp 345tq on mustang
329hp 363tq on dynojet

Edit: since it's 3.21s and the stock 20s with 33s I'll say.

318hp 348tq mustang
335hp 366tq dynojet

Sent from my KYOCERA-E6920 using Tapatalk

I was close just had the wrong Dyno lol

Sent from my KYOCERA-E6920 using Tapatalk

 

[cam101]

Dyno sheet from yesterday

Sent from my SM-G965U using Tapatalk

 

[RedSRT4Me]

Dyno sheet from yesterday

Sent from my SM-G965U using Tapatalk

Not that you'd want to lock 6th gear for a 1:1 pull but it would be nice. 8speed always downshifts.

 

[JayLeonard]

No rpm reference?
Years ago when I dynoed my 91 D250 Dodge/Cummins(non intercooled) the reference was rpm.
240/604 by the way. I miss the old gal, too bad it rusted away.

 

[cam101]

Not that you'd want to lock 6th gear for a 1:1 pull but it would be nice. 8speed always downshifts.

We did like 6 pulls. The shop they specialize in Fords. So it was definitely different but a good time.

Sent from my SM-G965U using Tapatalk

 

[Tracy in IL]

Did I miss the engine and tranny info?

 

[seabrook]

The results from the dyno are as follows:
315.64 hp
341.50 lbs
Not bad at all. I will post a picture of the graph later.

Sent from my SM-G965U using Tapatalk

Good numbers

 

[cam101]

Did I miss the engine and tranny info?

Stock 5 7 hemi engine and stock transmission

Sent from my SM-G965U using Tapatalk