Finally bit the bullet

[Thatdude596]

After talking to a few guys on here and looking at pics and prices a 100x I finally bit te bullet last week. I had only a hbs leveling kit on my ram before and last week ordered the pa 3" body lift and a flowmaster super 44 muffler. Got the body lift installed and the muffler after cutting the brackets, making a new muffler bracket to adapt to stock hangars, and getting tips in stock location

This am I ordered a pro comp 6" suspension kit, toyo open country mt 37x13.50x20 and fuel maverick 20x12x-44 offset black machines rims.

 

[xrsman]

9"...that'll be big! Lol

 

[OutlawTrucker]

9"...that'll be big! Lol

That's what she said- couldn't resist.

 

[xrsman]

That's what she said- couldn't resist.

Lmao!!

 

[OutlawTrucker]

I'm a truck driver. My mind is usually in the gutter. To be expected.

 

[Thatdude596]

Will get some pics later on body lift and level kit installed

Can I keep the level kit on for more added lift?

 

[Thatdude596]

Here's a few pics I took real quick. Body lift install took about 8 hours with a lift and access to everything needed. I wanted the exhaust to remain in the factory position so I went ahead and did some modifying on the exhaust hangers, and flowmaster super 44. If running a single dumper it wouldn't be as big of a chore.

 

[Thatdude596]

Rear with tips aligned

 

[Thatdude596]

Here's with the 3" body lift installed and no gap guards

 

[Thatdude596]

The rear exhaust hangers that I modded to keep it all factory so to speak

 

[Thatdude596]

Hanger I made up to hold the flowmaster super 44 muffler and to utilize stock bushings

 

[Thatdude596]

Another view of hanger and muffler, muffler sounds amazing! No really inteior drone or noise except when getting on the gas. Perfect choice for 90.00

 

[R.L.K.]

Can't wait to see your pics with the full 9" , what gears do you have ?

 

[Thatdude596]

Will be a total of 11" when done and yes should look killer with the wide stance.

 

[R.L.K.]

11 inches AWESOME ! 37" TIRES ON 12" WHEELS ... GOTTA SEE PICS WHEN YOUR DONE !

 

[R.L.K.]

11 " so I assume you will be keeping the leveling spacers ??? + 3" body lift + 6" suspension lift ...
What type shocks are you planning on and are you installing beefier UCAS ?
You should take lots of progress pics and post a build on here !

 

[R.L.K.]

Subscribed ! Gotta see the end product !

 

[Thatdude596]

3" pa body lift
6" suspension
5100's on 2.1 front
Hbs rear level spacer

11" total lift

I almost went 38's but couldn't with rubbing issues with the rim size I wanted. Also wanted 22" rims but wanted the -44 offset and couldn't get that with the fuel maverick 22x10-24

 

[R.L.K.]

That will be awesome , staying subscribed for pics!

 

[Litenyaup]

Pics!