Flashbacks/Tinted 3157's

[DeputyDipShizz]

I got the black housing lights for th3 RAM with the clear reflector...Looking to install either flashbacks...Or a set of 3157's I had before that had a tinted type lens on them...To avoid having the amber reflecting into the lens...

Anyone have any experience with a good set of flashbacks and wher3 did you get them? Also, is a resistor always needed or is there some available somewhere that a resistor isnt needed?

Other ideas?

Sent from my SM-N900P using Tapatalk

 

[MegaMouseGW]

If you get the can-buss led's then you will net need resistors. Only place I know where to get them is http://www.superbrightleds.com/?utm_source=General&utm_medium=PPC&utm_campaign=BING+-+LEDs+-+General

 

[BLKMAGIC]

I got my switch backs from Vleds and love them, but I did need to wire in resistors.

 

[Stangshcky12]

I believe you still need a resistor with the canbus LEDs
They don't have added resistance just built in protection for the computer I think

 

[MegaMouseGW]

I have been running Can-Bus leds for several months now with no problems at all.

 

[DeputyDipShizz]

The canbus however aren't flashbacks

Sent from my SM-N900P using Tapatalk

 

[MegaMouseGW]

These are the ones I run in my truck for the front flashers, no resistor at all: 3157 CAN Bus LED Bulb - Dual Intensity 26 SMD LED Tower | LED Brake Light, Turn Light and Tail Light Bulbs | LED Car Bulbs | Super Bright LEDs

Of course I did replace the flasher a while ago and that may be why I do not need a resistor.