fog lamp plug part number request

[WildcatHemi]

2016 1500 5.7

im doing led cubes on my aftermarket front bumper. i want to tie them into the fog light circuit. does anyone know the part number for the MALE side of the connector?

i found the female side on findpigtails.com but they didnt have the male side.

many thanks!

 

[tron67j]

PM @Mpgrimm2 you can find his site in the Vendor section under M²Mods, I believe he can help with a harness to wire directly to the fog light fuse. You can order the necessary replacement dash light switch and the connectors that go to each fog light through the Vendor @AllMoparParts.com this will make it like factory. I added aftermarket fog lights to my 2018 2500 to function like factory install. You will also need AlphaOBD to turn on the functionality. Good luck.

 

[Mpgrimm2]

Here's the thread to give you an overview... You'd need some OEM (9005?, 9145?, 9006?) to aftermarket pigtail adapters as well as the OEM foglight bumper harness and the extension harness I make.

- DIY: Add 2013-2018 OEM Foglight Wiring

Send me a private message here to get things started (I'll be back from vacation officially Monday, the M2 Mods website links are still disabled)


Mike G.
M2 Mods (on Ramforum)
www.M2Mods4Ram.com

 

[WildcatHemi]

my truck has all the factory plugs wires and switches for foglights. i removed the factory bumper. im installing a winch bumper. i will wire all the new lights into the male plug. i need the male plug that mates up with this plug. this is the connector to the factory foglight switch.

 

[AllMoparParts.com]

A pigtail like the attached is not available

I can get you a bumper harness that you can modify but need to confirm a few things such as do you have a steel bumper? Do you have Front Park Sensors?

- Benny

 

[WildcatHemi]

steel bumper and park sensors. the park sensors have a separate plug though.

i couldn’t get your pdf attachment to work.

 

[AllMoparParts.com]

Your correct. The fog lamp jumper can be found here https://parts.allmoparparts.com/oem...ing-68197065aa?c=bD0xJm49U2VhcmNoIFJlc3VsdHM=

You would cut and solder on your aftermarket lamp connectors (assuming they do not pull more amperage) and then plug the body side in.

Heres a slightly better image of the harness



- benny