Fold flat floor trim

[Snow69125]

Does anyone know the part number, name or where to get the trim piece on the fold flat floor that goes around the cup holders.

 

[audiophile]

I think this was posted once before but I couldn't find it. Look for Benny with Allmoparparts.com. He is a vendor on here.

Sent from my SM-G955U using Tapatalk

 

[kad]

It's not sold separately. (That is a quote from Benny)

Stuff like this is a common substitute: https://www.amazon.com/Edge-Trim-Black-Large-Height-Range/dp/B019RTJXEI

It's called "Edge Trim". Just make sure you get the right thickness to fit your floor piece.

Edit: Here's the post from Benny: https://www.ramforum.com/threads/paging-benny.161689/


-K

 

[nforkram]

I just noticed my 2013 Ram 1500 Laramie is missing 2 of those trims pieces as well. Big bummer since that panel costs $370. We need somebody on the factory production line to get us a few of them!

 

[kad]

I just noticed my 2013 Ram 1500 Laramie is missing 2 of those trims pieces as well. Big bummer since that panel costs $370. We need somebody on the factory production line to get us a few of them!

Hmm... Ok, no promises here, but I just (today) got a new 3D printer that can do larger objects than my old one. My old one could not have done that piece, this one, maybe. Can you take some pictures of what it looks like with the pieces missing? I can get most of the measurements I'll need off of my truck, but I'm not about to take mine apart and I'll need to see what it looks like under the plastic. It will be a bit before I've assembled and calibrated the new printer, but once I do I'll see what I can do.

-K

 

[Fastfox]

Hmm... Ok, no promises here, but I just (today) got a new 3D printer that can do larger objects than my old one. My old one could not have done that piece, this one, maybe. Can you take some pictures of what it looks like with the pieces missing? I can get most of the measurements I'll need off of my truck, but I'm not about to take mine apart and I'll need to see what it looks like under the plastic. It will be a bit before I've assembled and calibrated the new printer, but once I do I'll see what I can do.

-K

Long shot but did you ever manage to print this part? I've got a 3D printer too and was thinking the same thing

 

[kad]

Long shot but did you ever manage to print this part? I've got a 3D printer too and was thinking the same thing

I never got any photos of what the missing part looked like underneath so I never attempted it.

-K

 

[evision]

I know this thread is from mid 2022, but I am missing one and I am doing something about it. I have a 3D printer and i have designed a replacement part. I will be printing it out this week. It is a little different you will see from the photos. Any suggestions please don't hesitate. Once I confirm this is working and with no suggestions remaining I will post on Thingiverse.com as a free download.

 

[04fxdwgi]

Actually, if it is viable, I would be on the hunt for one. I don't own a 3D printer

 

[kad]

I know this thread is from mid 2022, but I am missing one and I am doing something about it. I have a 3D printer and i have designed a replacement part. I will be printing it out this week. It is a little different you will see from the photos. Any suggestions please don't hesitate. Once I confirm this is working and with no suggestions remaining I will post on Thingiverse.com as a free download.View attachment 531281View attachment 531282View attachment 531283View attachment 531284View attachment 531285View attachment 531286

One suggestion, having done similar 3d printed pieces before. Don't bother with printing screws, tap the holes and get metal screws to fit.

-K

 

[evision]

I was printing the screws in hope not having to purchase screws and be able to replace your bezel with just a print. But I do believe I will be using screws. It just makes sense. Thanks!

 

[dennyh]

Hi evision,

Wondering if you finalized and posted this part to Thinigverse? If so under what name. Thanks in advance, Denny

 

[GTyankee]

Now you just need to make a Filler Piece to fit inside of the cup holders.
Someone is always mentioning that their pet has or may step in it & hurt their Paws or leg

 

[Xyleff]

Bump.. has anyone been able to 3d print this piece??

 

[Aviator84]

Following. Actually, I'm going to thingiverse now to look. I'm ready to print this tonight!

 

[PaleFlyer]

Following. Actually, I'm going to thingiverse now to look. I'm ready to print this tonight!

If you do, you might want to see about "modifying" the design a little to use brass inserts for the threads, instead of just screwing into the plastic.