Fun with LEDs!

[blackout11]

ya blue looks cool give it a futuristic look

 

[quietpeen]

Looks awesome

 

[Docwagon1776]

Nice work, it looks good. As some others have said, it would be illegal in Indiana as well, though, unless you are a volunteer firefighter on your way to an emergency.

 

[WhiteRam]

Super *******.

Sent from my LG-P999 using Tapatalk 2

 

[the codes]

looks great, very clean work.

I like the blue, but like everyone says, more of a show it off in the parking lot thing then something you can drive around with.

still cool, id do it if i had a 4th gen lol

 

[king99]

I've been wanting to do this on my lower valance like you mentioned. What size bulbs did you use? 5mm, 3mm? Electronics are not my thing but I refuse to be defeated by them. Could you list the parts you used? Bulbs, resistors etc etc. I'm confident that i can do the install but not so confident that I will get all of the parts ordered correctly so that it all works properly. Is your power coming straight from battery? In-line fuse? Gotta dumb it down for me a bit. Still on an electronic learning curve.

 

[blackout11]

do it the way i did mine just order prewired led's that way all you need to do is connect the pos and neg's together then hook them to a switch

LEDs - underbody kits, cathodes, flexible LED strips, dome lights

Super Bright Pre-wired LEDs


go with 5mm

i also put 28 in each scoop

 

[SELARAM12]

Looks Badass!!

 

[Miami Son]

Just my opinion, but 28 per side seems like overkill to me. I just wanted some accent lighting, not a supplemental light source. At hood height I could see those being a real annoyance to a driver in front of you. Looks cool, though.

 

[blackout11]

Just my opinion, but 28 per side seems like overkill to me. I just wanted some accent lighting, not a supplemental light source. At hood height I could see those being a real annoyance to a driver in front of you. Looks cool, though.

oh lol its just for shows lol i dont drive around with them on

 

[pachuco77]

Looks great