Helloooo

[Panamaximus]

New on this forum. Traded in my old Pro4x for a 5.7 Liter Ram 4x4. I've searched the forum, but can't quite find the answer I am looking for. I want to put a small lift kit on. I'm looking at the Eibach e80-27-001-04-22 kit. I'm just unsure if it includes the rear spring. Also, what is an appropriate setting to keep some rake? Maybe set it around 2"? I don't want the front higher than the back, especially when I am towing a lighter weight boat. (About 3,000 lbs.)

 

[RedSRT4Me]

If you want rake and lift the front 2-3" you'll have to lift the rear the same amount.

I don't know of any lift kit that includes keeping rake though.

 

[Panamaximus]

I'm assuming I can lift the front just 1.75 or so with the 1" rear that is included with the eibach kit and it won't be too out of whack when towing??

 

[Quick_Shifter]

New on this forum. Traded in my old Pro4x for a 5.7 Liter Ram 4x4. I've searched the forum, but can't quite find the answer I am looking for. I want to put a small lift kit on. I'm looking at the Eibach e80-27-001-04-22 kit. I'm just unsure if it includes the rear spring. Also, what is an appropriate setting to keep some rake? Maybe set it around 2"? I don't want the front higher than the back, especially when I am towing a lighter weight boat. (About 3,000 lbs.)

Welcome.
Take pre lift measurements Ill calculate what height settings to use and @Nick@GotExhaust will set you up with the right kit with shocks and springs front and back

 

[Panamaximus]

Thanks. Nick@gotexhaust already hooked me up!
There are plenty of videos for putting Bilstein 5100’s on the front, I can use. Is there a videos online anywhere to do the rear?

 

[ram1500rsm]

You'll lose more time taking out the rear fender liner

Also plan to get the Thuren rear shock nut kit.
This will make the job a breeze first time and every single time after that.
https://www.thurenfabrication.com/products/dodge-ram.html/09-18-1500-shock-nut-set.html

 

[RedSRT4Me]

You'll loose more time taking out the rear fender liner

Also plan to get the Thuren rear shock nut kit.
This will make the job a breeze first time and every single time after that.
https://www.thurenfabrication.com/products/dodge-ram.html/09-18-1500-shock-nut-set.html

That's truth!!!%

 

[Panamaximus]

Very easy to follow video. I'm going to try and find one for the spring as well.

 

[Panamaximus]

Is there a link for 1/2" to 3/4" rear coil spacers?