I have a 2014 reg cab with a M/G deluxe 2/4 drop. I can't decide if I should go with 22inch or 24 in wheels. With 22's I can run the stock size RT tires which are 285/45/22 32.1 inches high. This would lower the truck another half inch and keep the tires from sticking out any further. The wheels for these would have a +15 offset and be 9 inches wide. The 24's would have the same specs and the tire I choose is 285/45/24 which is 33inches high same as stock. I am trying to visually get the truck to look lower. What do you guys think?
Help can't decide
- Thread starter DirtDog
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
gunner1374
Senior Member
- Joined
- Apr 1, 2012
- Posts
- 527
- Reaction score
- 184
- Location
- In the 405!!!
- Ram Year
- 2011
- Engine
- HEMI 5.7
+1^^^ I personally like the bigger rim look, but I would seriously consider the weight of each and go lighter. Either way, I am sure it will look good.
audio1der
Senior Member
- Joined
- Jul 30, 2012
- Posts
- 5,300
- Reaction score
- 1,105
- Location
- Airdrie, Alberta
- Ram Year
- 2012
- Engine
- Hemi 5.7
The 24" rim/tire combo likely weighs more as mentioned above; it will hurt your MPG, braking and acceleration but look BADASS. It may also ride more harshly- not sure how your roads are.
14hemiexpress
Senior Member
The only advantage of the 24 is keeping a stock height tire witch will keep your speedometer accurate, if you have a tuner or don't care about the speedometer being off then the 22 I think will give you more of the look your looking for, and they will be lighter.
