How High is this Lifted Ram? Is it also Levelled?

[Jayzonk]

Was just thinking about lifting and levelling my Ram Classic. I found this pic on the Lazerlamps site and thought that this truck seemed to be lifted and leveled to just the right amount. There is no side profile picture, but I'm wondering if anyone has a good idea as to what height this lift kit is, and if it's levelled. I'd also like to know if doing this is NOT a good idea. Will my speedo be out??
Obviously, I'll be opting for new tires/rims. I like these ones in the photo if anyone can hazard a guess as to what the setup is.

 

[blackbeautyhemi]

I’d say that’s a 4” lift not knowing any of the specs on it like the tire size. The speedometer will be off but there’s ways of correcting it.

 

[RamRod37]

seems to just have had the 2.5 inch leveling blocks put in front mine is stock except the blocks in front of course mine is a hd 2500 so that may play a different role

 

[Jayzonk]

Yes, I think you might be right. Just looking at the height of the center of the hub in relation to the body, your rear wheel looks like it's in the same position as the one in the photo, so perhaps it's just the levelling kit. Can that be done with the Bilstein 5100 kit? I think you can set it at 2.1 or 2.8 though.

 

[kurek]

Looks like a 4" lift and 35's to me.

Several good ways, a few bad ways to go about achieving that. Plenty of people happy with the superlift 4" kit.

Correcting the speedometer is the easiest part, get an obd2 dongle, an android phone and jscan.

 

[Phirebeard]

A lift will not affect your speedometer, but a different tire size will. Check out the lifted thread here, most of the posts have the lift and tire specs. Might help you narrow down what you're looking for.