Interior LED’s

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Hookedup87

Senior Member
Joined
Oct 23, 2019
Posts
467
Reaction score
577
Location
Long Island
Ram Year
2018
Engine
Hemi 5.7
I have switched all of my interior bulbs to LED’s except for vanity mirrors, glove box and footwell pods. Any tips or how to’s, tricks, etc, to doing these?
 

crash68

ACME product engineer
Staff member
Administrator Moderator Supporting Member
Joined
Mar 20, 2016
Posts
12,332
Reaction score
21,423
Ram Year
2015
Engine
3.0 EcoDiesel
The glovebox uses the 194 LED bulb that will fit in the maps lights. The footwell lights can use the same 194 or 921, the only difference is the 921 are a bigger bulb but the base is the same.
If I remember correctly these are the ones I used in the vanity mirrors: https://www.superbrightleds.com/mor...b-3-smd-led-miniature-wedge-retrofit-car/228/
They're cheap enough I bought two different styles in case I didn't like one or the other.
 
OP
OP
Hookedup87

Hookedup87

Senior Member
Joined
Oct 23, 2019
Posts
467
Reaction score
577
Location
Long Island
Ram Year
2018
Engine
Hemi 5.7
Thanks. Very helpful. Do you remember how you changed the ones in the footwell? Does the lens of the pod come off or do you remove the wire and bulb from the back? And the vanity mirrors. Did you use a small screwdriver to pop out the lenses?
 

crash68

ACME product engineer
Staff member
Administrator Moderator Supporting Member
Joined
Mar 20, 2016
Posts
12,332
Reaction score
21,423
Ram Year
2015
Engine
3.0 EcoDiesel
with mine ('15 model yr), yes and yes
The footwell lights the cover pops off and the vanity mirror light lenses come out. The glovebox light you pull the whole switch assembly out from the front.
I doubt much has changed with the lights since then.
 
Back
Top