BadCJ7
Junior Member
- Joined
- Nov 26, 2017
- Posts
- 15
- Reaction score
- 12
- Ram Year
- 2016
- Engine
- 5.7 Hemi
First forgive me if this is in the wrong section. I’m new to forums and not real familiar with how it works.
I leveled my 2016 Ram 1500 with Bilstein 5100’s set to 2.8 and added airlift 1000 bags to my rear springs as I tow a 16’ dual axle trailer. After the lift I had 275/65/r20 Coopers installed and had an alignment done. No rubbing, and tires handle great. After the alignment my steering wheel is cocked slightly to the right and the truck pulls to the left. I couldn’t take it right back to the shop so I thought I’d drive it the weekend and take it back on Monday. Today I towed my trailer about 70 miles to pick up some supplies at for a home remodel. On the highway at 65mph my cruise kicked off, and the message center said “SERVICE TRALER BRAKE SYSTEM”. Now my cruise won’t work, my traction light stays on and the dash keeps displaying the message about the Trailer Brakes
I plugged in my scan tool and I have one code on the ABS U0415-00 (Invalid Data from Antilock Control Module A
One code on the EPS that says C0051-28 (Steering wheel sensor out of range)
One code on my trailer brake system that says improbable data from ABS (sorry, I didn’t write the code down)
I tried clearing the codes and I get a message that codes are cleared but faults still active. I also tried resetting the steering angle but the ABS won’t allow that to happen either.
Do you think this is all caused by an improper alignment? Could they have done the alignment wrong and didn’t zero out the steering angle? Should they be able to correct this by doing the alignment properly again and resetting everything?
Sent from my iPad using Tapatalk
I leveled my 2016 Ram 1500 with Bilstein 5100’s set to 2.8 and added airlift 1000 bags to my rear springs as I tow a 16’ dual axle trailer. After the lift I had 275/65/r20 Coopers installed and had an alignment done. No rubbing, and tires handle great. After the alignment my steering wheel is cocked slightly to the right and the truck pulls to the left. I couldn’t take it right back to the shop so I thought I’d drive it the weekend and take it back on Monday. Today I towed my trailer about 70 miles to pick up some supplies at for a home remodel. On the highway at 65mph my cruise kicked off, and the message center said “SERVICE TRALER BRAKE SYSTEM”. Now my cruise won’t work, my traction light stays on and the dash keeps displaying the message about the Trailer Brakes
I plugged in my scan tool and I have one code on the ABS U0415-00 (Invalid Data from Antilock Control Module A
One code on the EPS that says C0051-28 (Steering wheel sensor out of range)
One code on my trailer brake system that says improbable data from ABS (sorry, I didn’t write the code down)
I tried clearing the codes and I get a message that codes are cleared but faults still active. I also tried resetting the steering angle but the ABS won’t allow that to happen either.
Do you think this is all caused by an improper alignment? Could they have done the alignment wrong and didn’t zero out the steering angle? Should they be able to correct this by doing the alignment properly again and resetting everything?
Sent from my iPad using Tapatalk