Just purchased bilsteins, have a question?

[Bctexascrazy1]

I've got a 15 sport 4x4 and just purchased a set of bilsteins. My question is, is it possible to run 35x12.50 r20 with aftermarket wheels with JUST the bilsteins? And if so what offset do I need on the wheels and where to set bilsteins? Other note is that if I have to buy spacer in the rear I will, plus I plan getting a set of the mevotec ucas just for insurance. Thanks!

 

[gassersarentdead]

It's alot easier to tell you what to do with the bilsteins if we know what offset your wheels are and the look you're wanting. Without knowing, is it possible? Yes.

 

[AustinB]

If you do a thread title search for "two questions...", I had similar question not too long ago and all your answers are probably there. I asked more than 2.

 

[Bctexascrazy1]

I'm looking at going with a 20x10 with -21 offset, I plan on doing a lift later on but I've got the shocks now and just wondered if the wheels n tires fit now?

 

[AustinB]

Just insurance, because **** happens.

 

[gassersarentdead]

I had mine at 2.8 with a 0 offset wheel and had no rubbing. I'd say if you go 2.1 or 2.8 you should be good, maybe minimal trimming. If you do rub it'll Prolly just catch the valance, I took that ugly ass thing off of my 1500.

 

[brandonjansen]

Check out the Guide to Leveling & Wheel and Tire Sizing linked in my signature for all the information you need on this.