Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
It must vary between 2013-2014 and even so, from vehicle to vehicle. I rechecked my bulbs on Sunday, and my reverse are can bus, plate, cargo and interior are NOT canbus and I get zero error messages. I even switched out some for the reverse to try and get an error and nothing happened. I put some in the rear turn signals and a message came on.
Just like Apepe said above, it's just trial and error. If you don't want to take the risk, just get the canbus leds to begin with. Adding resistors is a must for the turn signals though, I'm almost certain.
Keep us posted on what you find out.
Yeah, this is first I've heard of people NOT having problems with LEDs on the 2013+...
It didn't make sense to me why people were having problems in the first place. Especially with LEDs in the licence plate lights.
Once person said the 2013+ light run off BCM or something.
I have a 2014 Express, you WON'T get an error for the tag, reverse, third brake or interior lights. I replaced them all with fleabay cheap led bulbs and get no warnings whatsoever.
You will get them with the turn signals, you would need resistors for those.