Leveling 2020 Warlock V6

[David Craven]

Looking for some solid input on leveling my 2020 Warlock 2WD V6.

I have 2.5" spacers in the front; love the look but hate the ride. I dont want to put 35's on it since it has the V6.

What are my best options?

 

[Brallan perez]

Any luck? I have 2020 warlock v6 2wd as well and really want to level it out, i found one video where they installed the 2” rough country coil springs and struts that are meant for the v8 i reached out to rough country to get some clarification and nothing yet

 

[Quick_Shifter]

@Maxtrac Suspension
Maxtrac is the go to for 2 wheel drive. I would not recommend rough country

 

[Brallan perez]

@Maxtrac Suspension
Maxtrac is the go to for 2 wheel drive. I would not recommend rough country

But do you have a leveling kit for 2wd v6?

 

[Quick_Shifter]

If you guys are just doing a small level we’ll need your current measurements as all trucks will be different. Do not get stuff made for a V8 and definitely don’t put rough country on your new trucks.
If you are just planning on 2” your options are going to be limited but we can steer you in the right direction. Off the top of my head Moto fab makes a coil spacer for 2wd then we would need to measure for shocks. Post up your measurements now and we’ll lay out your options

 

[Quick_Shifter]

Do a little reading on this set up as well
Max trac coils part number 752120-8
And fox shocks part Number
985-24-096
Do your research I just did a quick search and this is what I found in 5 minutes. Disclaimer this was just a quick search I don’t know if this would work for you.
The warlock in 4wd is an inch taller so I’m not sure if the 2wd trucks are the same. That being said a 2.5” lift coil would lift a warlock 1.5” (just spit balling here)